For Sale Clear out of some bits/swap

Gulwing

Dirt Disciple
Hi, Im having a clear out of some bits, ideally I don't want to sell the groupset separately but im open to offers for bits separately. I'm looking out for some 1" carbon forks, steerer tube 220mm minimum cash either way if someone is interested in swapping.

I have

105 1056 8 spd part groupset, no chainset but I have 105 hubs, unbranded rims. £120ono.

Unbranded 1 1/8" forks 195mm steerer, no crown fitted. Not used by me and appear unused £40ono.

Alpina forks 1 1/8" 205mm steerer, have been used. Crown fitted. 40ono.

Sora 3300 front derailleur £10
Sora 3400 rear derailleur £10

Happy to post all of the above, collection east Midlands. (I can take apart the wheelset for delivery).
 

Attachments

  • 20240208_182501.webp
    20240208_182501.webp
    479.5 KB · Views: 23
  • 20231022_133532.webp
    20231022_133532.webp
    489.1 KB · Views: 14
  • 20231022_133541.webp
    20231022_133541.webp
    494.7 KB · Views: 13
  • 20231227_145443.webp
    20231227_145443.webp
    183.1 KB · Views: 17
  • 20240208_183934.webp
    20240208_183934.webp
    88.1 KB · Views: 19
  • 20240208_183952.webp
    20240208_183952.webp
    86.9 KB · Views: 30
  • 20240208_182433.webp
    20240208_182433.webp
    333.3 KB · Views: 27
OK, well I have a Profile carbon fork with ample length on the steerer. Also found an ITM Millenium fork which beats the above one due to it's steerer being carbon. However I forgot to take it home with me from where I have it stored in an out of town lockup, so wasn't able to measure the steerer. By sight though, it looked to measure around 220mm, but of course you'd need real accuracy so I'll take a proper measurement (and pics) if the fork is of interest.
 
OK, well I have a Profile carbon fork with ample length on the steerer. Also found an ITM Millenium fork which beats the above one due to it's steerer being carbon. However I forgot to take it home with me from where I have it stored in an out of town lockup, so wasn't able to measure the steerer. By sight though, it looked to measure around 220mm, but of course you'd need real accuracy so I'll take a proper measurement (and pics) if the fork is of interest.
Sorry I think I forget to post reply sometimes 😅 the profile forks sounds good. Did you have a price in mind? 220mm steerer is fine. Sorry again for the late reply
 
No problem, although it turns out you're not the only one who's been a bit careless, seeing as I'd gotten the Profile forks confused since it was stacked in a box of other forks and the long steerer I'd seen actually belonged to a different pair. Nevermind, there's still the ITM forks which potentially have a suitable steerer, although you don't seem interested in them?
 
Hi, Im having a clear out of some bits, ideally I don't want to sell the groupset separately but im open to offers for bits separately. I'm looking out for some 1" carbon forks, steerer tube 220mm minimum cash either way if someone is interested in swapping.

I have

105 1056 8 spd part groupset, no chainset but I have 105 hubs, unbranded rims. £120ono.

Unbranded 1 1/8" forks 195mm steerer, no crown fitted. Not used by me and appear unused £40ono.

Alpina forks 1 1/8" 205mm steerer, have been used. Crown fitted. 40ono.

Sora 3300 front derailleur £10
Sora 3400 rear derailleur £10

Happy to post all of the above, collection east Midlands. (I can take apart the wheelset for delivery).
Unbranded forks are sold.
 
No problem, although it turns out you're not the only one who's been a bit careless, seeing as I'd gotten the Profile forks confused since it was stacked in a box of other forks and the long steerer I'd seen actually belonged to a different pair. Nevermind, there's still the ITM forks which potentially have a suitable steerer, although you don't seem interested in them?
Hi, thanks for your time on this. I will leave it for now. Thanks again.
 
Back
Top