For Sale Clear out of some bits/swap

[Gulwing]

Hi, Im having a clear out of some bits, ideally I don't want to sell the groupset separately but im open to offers for bits separately. I'm looking out for some 1" carbon forks, steerer tube 220mm minimum cash either way if someone is interested in swapping.

I have

105 1056 8 spd part groupset, no chainset but I have 105 hubs, unbranded rims. £120ono.

Unbranded 1 1/8" forks 195mm steerer, no crown fitted. Not used by me and appear unused £40ono.

Alpina forks 1 1/8" 205mm steerer, have been used. Crown fitted. 40ono.

Sora 3300 front derailleur £10
Sora 3400 rear derailleur £10

Happy to post all of the above, collection east Midlands. (I can take apart the wheelset for delivery).

 

[walkmanman]

Think I have a pair of the forks you're after. Just need to measure the steerer tube but it's a v long one so seems likely it'll pass.

 

[walkmanman]

OK, well I have a Profile carbon fork with ample length on the steerer. Also found an ITM Millenium fork which beats the above one due to it's steerer being carbon. However I forgot to take it home with me from where I have it stored in an out of town lockup, so wasn't able to measure the steerer. By sight though, it looked to measure around 220mm, but of course you'd need real accuracy so I'll take a proper measurement (and pics) if the fork is of interest.

 

[Gulwing]

OK, well I have a Profile carbon fork with ample length on the steerer. Also found an ITM Millenium fork which beats the above one due to it's steerer being carbon. However I forgot to take it home with me from where I have it stored in an out of town lockup, so wasn't able to measure the steerer. By sight though, it looked to measure around 220mm, but of course you'd need real accuracy so I'll take a proper measurement (and pics) if the fork is of interest.

Sorry I think I forget to post reply sometimes the profile forks sounds good. Did you have a price in mind? 220mm steerer is fine. Sorry again for the late reply

 

[walkmanman]

No problem, although it turns out you're not the only one who's been a bit careless, seeing as I'd gotten the Profile forks confused since it was stacked in a box of other forks and the long steerer I'd seen actually belonged to a different pair. Nevermind, there's still the ITM forks which potentially have a suitable steerer, although you don't seem interested in them?

 

[MartinB123]

Sent you a message @Gulwing

 

[Gulwing]

Hi, Im having a clear out of some bits, ideally I don't want to sell the groupset separately but im open to offers for bits separately. I'm looking out for some 1" carbon forks, steerer tube 220mm minimum cash either way if someone is interested in swapping.

I have

105 1056 8 spd part groupset, no chainset but I have 105 hubs, unbranded rims. £120ono.

Unbranded 1 1/8" forks 195mm steerer, no crown fitted. Not used by me and appear unused £40ono.

Alpina forks 1 1/8" 205mm steerer, have been used. Crown fitted. 40ono.

Sora 3300 front derailleur £10
Sora 3400 rear derailleur £10

Happy to post all of the above, collection east Midlands. (I can take apart the wheelset for delivery).

Unbranded forks are sold.

 

[Gulwing]

No problem, although it turns out you're not the only one who's been a bit careless, seeing as I'd gotten the Profile forks confused since it was stacked in a box of other forks and the long steerer I'd seen actually belonged to a different pair. Nevermind, there's still the ITM forks which potentially have a suitable steerer, although you don't seem interested in them?

Hi, thanks for your time on this. I will leave it for now. Thanks again.

 

[walkmanman]

Okey dokey. Hope you manage to find a pair of the forks.