jimbog
Senior Retro Guru
Hi all, not sure if this is of any use to anybody? The frame itself is in fair condition but the seat post is stuck and has been cut off by a previous owner. They have fitted a smaller diameter seatpost and clamp that fits inside the cut off original. Also I the non drive side bb cup is spinning when trying to remove and doesn’t come out of the frame. I suspect that the bottom bracket threads are knackered on that side??? The hollowtech 2 bottom bracket is not the best but may function ok for a bit. Just want it gone and don’t really want to take it the tip in case anybody fancy’s a challenge or can live with it as a commute/pub bike. Shame as it was a top end frame and is super light.
I would really only want somebody to collect it unless it’s worth my while to post.
Not sure how to even go about pricing this. Maybe £40 collected from Maidenhead and see if there is any interest. Happy to discuss. Frame is 17 inch centre to top.
I would really only want somebody to collect it unless it’s worth my while to post.
Not sure how to even go about pricing this. Maybe £40 collected from Maidenhead and see if there is any interest. Happy to discuss. Frame is 17 inch centre to top.
Attachments
Last edited:
