Surely you would replace decals for originality, the same would apply to the protector if the op is trying to retain that. If not then just wrap some tape around it.
Chainstay Protector re-use
- Thread starter 79stef
- Start date
Surely you would replace decals for originality, the same would apply to the protector if the op is trying to retain that. If not then just wrap some tape around it.
novocaine
Old School Grand Master
No I wouldn't, it's so simply an item that I'd cut a new one, even of it does say trek in it. Its solid colour and easy to recreate, unlike decals.
I did not say you would? I said the op would if they were trying to retain the originality of the frame.
I was assuming originality wasn't something they were concerned with, considering they're polishing the whole thing up, but your reapplying the sticky gunk approach seems very valid for a more period correct approach
Just assumed with asking the question and going through the hassle of removing it without damaging it and re-applying it that they were hoping to save it. Easily enough replaced with something else if they are not bothered about the frame that much.
I have re-used a few on my frames, as they were original and you can't get them that easily nowadays, The old Kona ones tend to peel off by themselves but are of a harder material so tend not to rip.
Good info
didn't know they were easily reappliable. Which sticky gooey stuff do you use?Oh dear, what have I started!
Firstly, thanks for your replies. Other than a few teeaks, I do indeed want to keep the build original, hence wanting to retain the chainstay protector.
This, however, means either polishing around it, removing and re-applying it, or getting another identical one.
Finding an identical replacement is proving difficult more than I had imagined. I am not fussed if I find NOS or have one made up, so on that note, can anyone point me in the direction of a new one in case I mess up my old? (No rubber alternatives please - Valentine's day or not!)
Firstly, thanks for your replies. Other than a few teeaks, I do indeed want to keep the build original, hence wanting to retain the chainstay protector.
This, however, means either polishing around it, removing and re-applying it, or getting another identical one.
Finding an identical replacement is proving difficult more than I had imagined. I am not fussed if I find NOS or have one made up, so on that note, can anyone point me in the direction of a new one in case I mess up my old? (No rubber alternatives please - Valentine's day or not!)
novocaine
Old School Grand Master
given that it's printed, you need to find a sign maker with a vinyl printer. you can do it at home with an inkjet, but it's white print so not really an option.
they were made using screen printing, if you want to try your hand.
as to the vinyl, a sheet of A$4 in the right colour is pennies.
they were made using screen printing, if you want to try your hand.
as to the vinyl, a sheet of A$4 in the right colour is pennies.
Thanks. I will consider this if the outcome of my other options doesn't happen - those being: 1. Find a new (old) one 2. Salvage mine, if good enough.
You're right, the process seems straight forward enough but I don't really want to find the materials, logos (I'm crap with the computer) etc to be able to do it unless I have to!
