Carlton Constellation chrome restoration

Re:

I've still got things to do on the machine, like final fix of brakes and gears as well as a few other bits and bobs, but found some time to add those nice finishing touches. The machine now has a rather lovely chrome ping bell, and some cable clips (I managed to get a red anodised Diacomp version). The front mudguard now sports a mudflap too. Finally got a new old stock Huret band on lever boss, so the hurt Alvit mech now works. The machine is not mint as you can see, but the look of use suits it well to my eye. I hope to have this one on the road in the next week or so of time permits...

P7230202_zpsde3e9a63.jpg


Love these old blue C nuts...
P7230201_zps8c5ff518.jpg


New waterside decals, you can see the wear underneath, scraping the old worn decal took time and care...
P7230200_zpscb23f91e.jpg


P7230198_zps586d2687.jpg


P7230196_zps803338bd.jpg


The lever is a little later, but will do...
P7230195_zps9edfc40a.jpg


The old braze on boss is knackered. Most probably was a Campag unit.

P7230193_zps6b8b2627.jpg


The clips keep those new ribbed white cable tidy and out of the way...
P7230191_zps737d9bee.jpg
 
The anodised cable clip is a very nice touch. As is the way you have cleaned and yet retained the original colours and character. Very impressive

HW
 
Re:

Finally 'hit' the road with a test run today, not 100% right yet, but nearly there...

P8020457_zps930da7f2.jpg


P8020456_zpsd426a750.jpg
 
Not taken any images of this fella for a while as I have been busy on other projects...

I recently fitted period lamps to the bike complete with the old 800 twin cell battery which came with one of the lamps. It no longer works but is a rare find, as most of these have probably been thrown away of rotted.

Ive not ridden the bike at all since the build as I still have to get the front wheel trued up a little.

PA250086_zpsad068205.jpg


PA250088_zps98429214.jpg


PA250090_zps35448389.jpg


PA250091_zps14731c2a.jpg


PA250097_zpsa2e1b4b0.jpg
 
Re:

Out for a morning blast...

PA260106_zpsafd97249.jpg


PA260104_zps1928b2d2.jpg


A few niggles to sort, but nothing too serious. The old Alvit rear mech worked well, Weinmann 730 brakes are acceptable in performance. The bike will never be ridden in the wet, so thats a relief!

The overall position on this old fella is one of a very relaxed ride, the 22 rear block is a little tough on some of the hilly parts of Plymouth, but this old machine is never going to be a high mileage cycle.

The red colour scheme get a few glances thats for sure!
 
Re: Re:

bagpuss":3u9st7tw said:
Mike.
Very nice job again . Coloured cable clip done by you ? .

Yes, I added a few red touched like the pump and toe clips and the cable clip behind the headset... makes a change form back or white! :D
 
As said on Facebook, this is my favourite of your builds so far :)\
Also love a lot the spear point lugs.
 
Back
Top