dadoflam
Dirt Disciple
I want to build a set of traditional looking carbon tubular wheels to run on some 90’s bikes fitted with Campy 8 speed drivetrains. The carbon rims should give me some added stiffness and also provide the dark rims look of dark anodized rims but without the long term loss of finish that alloy rims suffer. I should also be able to drop a little weight as a bonus.
The challenge is bridging the gap between available rims and hubs in terms of drillings. To my knowledge Campy 8 speed rear hubs are limited to 32H and 36H. The highest drilling I can find in a rim is the older Enve 1.25 tubular rims which were available in 28H and seem to still be available around the place.
Is anyone aware of a 28H Campy 8spd compatible rear hub or 32H low profile carbon rim?
The challenge is bridging the gap between available rims and hubs in terms of drillings. To my knowledge Campy 8 speed rear hubs are limited to 32H and 36H. The highest drilling I can find in a rim is the older Enve 1.25 tubular rims which were available in 28H and seem to still be available around the place.
Is anyone aware of a 28H Campy 8spd compatible rear hub or 32H low profile carbon rim?