Campagnolo cup/cone BBs, headsets and skewers

gattonero

Retro Guru
*** my PM do not seem to go out, so please get in touch by using the "EMAIL" button (just under the signature) thank you ***


Used "68 - SS" cup&cone BB with BSA (1.37" x 24) threaded cups.
The axle is ok with very little pitting and no rust or corrosion , the cups are in good conditions.
Comes with axle, original crank bolts&washers, cups, lockring, caged bearings and "accordion" cover; £45
28722427477_ece56c7e3e_b.jpg


28722427467_e12e461568_b.jpg


43609967111_40112f003b_b.jpg


28722427547_4f0fc731d5_b.jpg



Used "68 - SS - 120" cup&cone BB with BSA (1.37" x 24) threaded cups.
The axle isn't in great shape with no rust or corrosion but has some pitting, the cups look in good shape.
Comes with axle, cups, lockring, caged bearings and "accordion" cover; £25
28722430547_7f2656a85c_b.jpg


43562742642_eaa5b4ccd1_b.jpg


43609968681_4a9d817f1b_b.jpg


43609967201_6210963db7_b.jpg



Campagnolo Record headset, 1" threaded with the grease port at the bottom.
The top side is in very good conditions, the bottom is ok, you may want to replace the crown race though is usable as it is. £30 ONO
42892462224_9c6332daab_b.jpg


43562739672_4336c9de40_b.jpg



Campagnolo Chorus headset, 1" threaded.
In ok/usable conditions, loose bearings at the bottom side. £20
42892462234_145a5c099a_b.jpg


41802507320_d53452728c_b.jpg



Campagnolo skewers for older Neutron Ultra/Eurus/Hyperon (with alloy lever and nut), all in very good conditions.
One set in black and one in silver, £15 each set - BOTH SETS SOLD! -
43562747132_5a616af5db_b.jpg

29740041578_a6a8d951d9_b.jpg


29740042788_8ac12ff73f_b.jpg

28722439727_9af87ea970_b.jpg


Last but not least, NOS skewers for Shamal/Bora/Neutron Ultra/Eurus/Hyperon, alloy lever and nut.
NOS in bag with the magnet for flat spokes, tools, etc.; £25 (STILL AVAILABLE)
42705928395_e10ea4a687_b.jpg



Please note: postage can differ a lot depending on location, so please ask. FYI, I do not make any money from the P&P, indeed I would lose a bit by not charging for the packaging and not charging the pennies, i.e. to post a set of crank bolt in the UK may be something like £2.80 and I'll ask you £2.50 :xmas-big-grin:
 
Back
Top