Campag chainring bolt tool

[RobWJL]

Please could someone advise what tool I need to hold the rear of the bolt / nut in place whilst the front is tightened with an allen key? It looks like in needs a kind of two pin spanner...

I have tried everything in the garage with no success!

The bolts came on a super record or nuovo record chainset.
Thanks!

 

[Excel]

you need something like this most bike shops should have them....
<< http://sheldonbrown.com/harris/images/TL6123.jpg >>

Griff

 

[Giosgremlin]

you need something like this most bike shops should have them....
<< http://sheldonbrown.com/harris/images/TL6123.jpg >>

Griff

A complete tool set for the maintenance And service of campagolo Pedals And crankset is offered on the bay right now:
http://www.ebay.de/sch/i.html?_from=R40 ... +&_sacat=0
Especially the "peanutbutter" Wrench is absolutly necessary for any campagnolo equiped roadbike. No normal wrench can tighten the crankbolts.

 

[pigman]

Re:

They are actually not that good and I say that owning a campag one. When everything is nice and shiny, they are a pleasure to use. Once bolts have become corroded and seized, they are not the lifesaver you might envisage.

The best is a screwdriver with a wide head, or fashion something yourself like cutting a 5p in half and holding it with pliers, using the straight edge on the semicircle as if it were a big screwdriver.