Campag Centaur hub service.

[66 triumph daytona]

Im about to service a set of 89/90 Centaur hubs.Anyone have a step by step guide and what to look out for?

 

[hamster]

Freewheel or cassette?
If cassette they are identical to the road ones, the only thing to be careful is that the pawls and springs can fall out and be mislaid.

 

[66 triumph daytona]

Freewheel or cassette?
If cassette they are identical to the road ones, the only thing to be careful is that the pawls and springs can fall out and be mislaid.

Its a freewheel hub.

 

[hamster]

To be honest on any cup-and-cone hub the best thing is to back the LHS side off around 5mm, enough so that you can look into each side but without balls dropping out. If it's all clean, squirt in more grease, retighten and leave well alone. If rusty or mucky then further inspection is needed.
Most Campag hubs have non-rotating washers between the cone and locknut which makes setting up far easier than Shimano.