includes Chris King headset, seat collar and thru axles
Geometry attached. about a 55.5, stack 564, reach 395.
headtube cut for 32.5mm spacers + stem
Tire clearance: 650bx2.1" (or 650x48 with fenders) is the stated clearance. There is room for a tiny bit more; I ran 650bx55 RH Umtanum Ridge with 4-5mm daylight on either side. 700cx45(measured) is max 700c size.
Condition is excellent: clean, beautiful paint - faint cable-rub on head tube, pin-head nick in seatstay, paint chip on upper hose entry port; otherwise excellent paint condition.
Features:
Columbus Spirit tubing and (Igleheart) segmented fork
142x12, 100x12 spacing, thru-axles
BSA threaded bottom bracket
27.2 seatpost
1 1/8" steerer tube
IS disc-brake mounts
internal rear brake routing
fender mounts
1x drivetrain cable routing
3x bottle mounts, bento box mounts on top tube, 3-pack mounts on fork. I had it set up with a mini rando rack.
dynamo light internal routing in frame&fork, taillight mount above NDS.
Price is 2000eur, I’am in Denmark
Geometry attached. about a 55.5, stack 564, reach 395.
headtube cut for 32.5mm spacers + stem
Tire clearance: 650bx2.1" (or 650x48 with fenders) is the stated clearance. There is room for a tiny bit more; I ran 650bx55 RH Umtanum Ridge with 4-5mm daylight on either side. 700cx45(measured) is max 700c size.
Condition is excellent: clean, beautiful paint - faint cable-rub on head tube, pin-head nick in seatstay, paint chip on upper hose entry port; otherwise excellent paint condition.
Features:
Columbus Spirit tubing and (Igleheart) segmented fork
142x12, 100x12 spacing, thru-axles
BSA threaded bottom bracket
27.2 seatpost
1 1/8" steerer tube
IS disc-brake mounts
internal rear brake routing
fender mounts
1x drivetrain cable routing
3x bottle mounts, bento box mounts on top tube, 3-pack mounts on fork. I had it set up with a mini rando rack.
dynamo light internal routing in frame&fork, taillight mount above NDS.
Price is 2000eur, I’am in Denmark
