Brakes,Levers,Mechs,Shifters,Stems,Kona stuff,Crud catcher

[spatuluk]

Time for a bit of a clearout, methinks! Prices include postage within the UK.

Kona Project 2 1 1/8" fork. £30
Kona Impact 1 1/8" threaded headset. £15
Kona Velocity 1 1/8" quill stem. £15

Shimano BR-M502 Deore LX SLR Cantilever Brakes. £10
Shimano BL-MT63 Deore DX SLR Cantilever Brake Levers. £15 SOLD
Shimano BL-MC40 STX RC Cantilever Brake Levers. £10
Kona Cantilever Brake Levers. Very tatty. £3 Adjusters removed after photo was taken

Shimano MT62 Deore DX thumb shifters. £25
Shimano SL-MC41 STX RC 8 Speed Shifters. £10 SOLD
Shimano RD-MC38 STX RC Rear Mech. £15
Shimano FD-M550 Deore LX Front Mech. Tatty. £8

Stem measurements were done by me, so probably not hugely accurate..
Ritchey 1 1/8" quill stem. 140mm extension, 25mm rise. £15 SOLD
Ritchey 'Force' 1 1/8" quill stem. 130mm extension, 25mm rise. £15 SOLD
Unknown 1 1/8" quill stem. 100mm extension, 30mm rise. £8
Kalloy 1 1/8" ahead stem. 110mm extension, 10mm rise. £8

Purple Crud Catcher. Slightly worn-looking. £10

Feel free to make me an offer if you think the prices are ludicrous (it was mostly quesswork!)

Photos in the next post..

 

[spatuluk]

Re: Brakes, Levers, Mechs, Shifters, & Stems

Kona Project 2 fork


Kona Impact threaded headset
Tiny nick in the fork crown race, but don't think it's enough to cause issues?

Kona Velocity quill stem



Shimano MT62 Deore DX thumb shifters
Some of the black paint is worn, but otherwise lovely.


Purple Crud Catcher
A bit worn out-looking, but PURPLE!


Shimano BR-M502 Deore LX SLR Cantilever Brakes.
Straddle bolts are mismatched. Brake fittings are included.


Shimano BL-MT63 Deore DX SLR Cantilever Brake Levers.



Shimano BL-MC40 STX RC Cantilever Brake Levers.
Logos have vanished due to overenthusiastic cleaning by the person who sold them to me. :|


Kona Cantilever Brake Levers.
Very tatty - frame on one lever is cracked, and the paint is a bit bubbly in places. Also, they no longer have adjusters.



Shimano SL-MC41 STX RC 8 Speed Shifters.


Shimano RD-MC38 STX RC Rear Mech.


Shimano FD-M550 Deore LX Front Mech.
Some minor rust and scratches. Looks like it might clean up well using tin foil and coke, but haven't got any at work to try it with.



Ritchey 1 1/8" quill stem. 140mm extension, 25mm rise.
I've got another one of these that I'll be selling later on.


Ritchey 'Force' 1 1/8" quill stem. 130mm extension, 25mm rise.



Unknown 1 1/8" quill stem. 100mm extension, 30mm rise.
Never been used. There is a logo below the insert line, which looks like 'JD', or maybe 'UO'.



Kalloy 1 1/8" ahead stem. 110mm extension, 10mm rise.

 

[jitensha]

Re: Brakes, Levers, Mechs, Shifters, & Stems

I'd like to buy the STX RC 8 spd shifter pods please. PM sent.

 

[Racin'snake]

Re: Brakes, Levers, Mechs, Shifters, & Stems

I think the M502 cantis are lx. Dx were M650 ;-) glws

 

[spatuluk]

Re: Brakes, Levers, Mechs, Shifters, & Stems

I think the M502 cantis are lx. Dx were M650 ;-) glws

Yeah, further hunting seems to indicate they're LX, so I've changed it. Ta!

Also; bumpski!

 

[spatuluk]

Re: Brakes, Levers, Mechs, Shifters, & Stems

I'm not doing a very good job at keeping this bumped, am I?

Might be adding some DX thumbies, some Kona gubbins, a purple crud catcher, and some chainset-related bits tomorrow.

 

[videojetman]

Re: Brakes, Levers, Mechs, Shifters, & Stems

pm re : dx brake levers.

 

[Mike Muz]

Re: Brakes, Levers, Mechs, Shifters, & Stems

Hi ,
Interested in the Ritchey stems , is the rise really measured in mm or did you mean degrees ? Thanks , Mike .

 

[Mike Muz]

Re: Brakes, Levers, Mechs, Shifters, & Stems

Hiu ,
I'll take both Ritchey stems if you don't mind . pm sent
Mike

 

[spatuluk]

Re: Brakes, Levers, Mechs, Shifters, & Stems

Bump for addition of thumbies and crud catcher, plus some price drops.

edit: And now some Kona stuff!