Bleeding Magura hydraulic HS11 brakes

[Gazjacko]

Re:

Well fellas thanks for all the pointers I might have to try on the tandem as it’s not designed for hydraulic so I intended to thread the long hose first then connect it up. I like the height idea so I’ll stand it on the rear wheel and use a stepladder.
I’ll update when this Covid-19 nonsense is over as I’m not able to access my bike store whilst shielded.
Stay healthy

 

[les_xr2]

Hi guys I’m currently useing an hs11 leaver but there is no fitting for the hose going in to leaver? As I’m getting a little leak from it was going to see if it needed nipping back up

I know it’s upside down that’s all o have I’m on the hunt for other hs33 leaver

How do I tighten it

 

[hamster]

Assuming it's the RH lever, pull off the plastic shroud over the pipe, there is an 8mm fitting behind it that takes a normal spanner.

 

[les_xr2]

Assuming it's the RH lever, pull off the plastic shroud over the pipe, there is an 8mm fitting behind it that takes a normal spanner.

Ahh thanks yes it is a RH lever didn’t know the plastic shroud come off thanks

 

[les_xr2]

Assuming it's the RH lever, pull off the plastic shroud over the pipe, there is an 8mm fitting behind it that takes a normal spanner.

I’ve just tried to pull it off doesn’t seem to want to come off? Any ideas

 

[paton]

 

[baron von greenback]

If you need more help I got the original manual that's comes with the brakes I dig it out mate just let me know