Jonny69
Senior Retro Guru
Chainrings:
Stronglight Dural 39T inner, 3/32”, 135bcd; £10
Stronglight 44T, 1/8”, 144bcd; £10
Brake callipers etc:
Top row L to R:
-late 40s Raleigh front calliper, nickel plated steel; £10
-Weinmann 730, 1970s, nutted, front and rear; £10
Bottom row L to R:
-Shimano SLR front calliper x2, recessed type; £15 each
-Avid Single Digit vee brake set, front and rear, new/unused, with fittings; [SOLD]
Brake levers, L to R:
-Weinmann levers, 1970s, stamped Weinmann on lever; £10
-MAFAC levers, 1960s/1970s, red rubber tips; £15
-Shimano BL-A451 Exage Sport aero levers, late 80s, sticky hoods, levers and mechanism in very good condition; £15
-Resilion spoon lever, 1930s; £25
Hubs:
-1980s Campagnolo Record front hub, 24 hole, used for time trialling back in the day, professionally slotted on lathe and dust caps removed, grease is mucky but bearings still smooth; £15
-1950s Exceltoo front hub, 32 hole, chromed steel high flange, NOS and never laced; £15
Trivelox B rear derailleur, 1930s; £25
Pavarin slotted cleats. Came from Detto Pietro shoes but should fit any shoe with a bolt fitting; £5
6-speed Regina Extra BX freewheel, ratios: 13, 14, 15, 16, 18, 20. Was NOS when I got it and had little use; £15 [SOLD]
Shimano Uniglide / Hyperglide freehub. Has both external threads for Uniglide and internal threads for Hyperglide. Up to 7-speed. Unused and very rare; £15
SRAM X0 2x 10-speed front mech and L/R shifters. Well used with a bit of muck and cosmetic damage on one of the shells but still in perfect working order; £35
Lezyne Micro Floor Drive frame mount folding track pump. With gauge. Will actually put in 120psi. Really good pump but I don’t use it; £25 [SOLD]
Bars L to R:
-Classic alloy drops on 80mm SR stem, 25.4mm clamp, 150mm drop, 39cm ctc at drops; £15
-3TTT Moscow bars on generic 80mm quill stem, 26mm clamp, 42cm ctc wide, drilled bitd at the front but uncut, scuffing on the clamp area from tri bars; £35 [SOLD]
-Nitto B123AA with 100mm Nitto Jaguar stem and Soyo grips, all NJS, 25.4mm clamp, 190mm drop, 40cm ctc at drops; £75
-Aero bars, generic alloy but fully adjustable, great for setting up, 25.4mm-26mm clamp; £15
Stronglight Dural 39T inner, 3/32”, 135bcd; £10
Stronglight 44T, 1/8”, 144bcd; £10
Brake callipers etc:
Top row L to R:
-late 40s Raleigh front calliper, nickel plated steel; £10
-Weinmann 730, 1970s, nutted, front and rear; £10
Bottom row L to R:
-Shimano SLR front calliper x2, recessed type; £15 each
-Avid Single Digit vee brake set, front and rear, new/unused, with fittings; [SOLD]
Brake levers, L to R:
-Weinmann levers, 1970s, stamped Weinmann on lever; £10
-MAFAC levers, 1960s/1970s, red rubber tips; £15
-Shimano BL-A451 Exage Sport aero levers, late 80s, sticky hoods, levers and mechanism in very good condition; £15
-Resilion spoon lever, 1930s; £25
Hubs:
-1980s Campagnolo Record front hub, 24 hole, used for time trialling back in the day, professionally slotted on lathe and dust caps removed, grease is mucky but bearings still smooth; £15
-1950s Exceltoo front hub, 32 hole, chromed steel high flange, NOS and never laced; £15
Trivelox B rear derailleur, 1930s; £25
Pavarin slotted cleats. Came from Detto Pietro shoes but should fit any shoe with a bolt fitting; £5
6-speed Regina Extra BX freewheel, ratios: 13, 14, 15, 16, 18, 20. Was NOS when I got it and had little use; £15 [SOLD]
Shimano Uniglide / Hyperglide freehub. Has both external threads for Uniglide and internal threads for Hyperglide. Up to 7-speed. Unused and very rare; £15
SRAM X0 2x 10-speed front mech and L/R shifters. Well used with a bit of muck and cosmetic damage on one of the shells but still in perfect working order; £35
Lezyne Micro Floor Drive frame mount folding track pump. With gauge. Will actually put in 120psi. Really good pump but I don’t use it; £25 [SOLD]
Bars L to R:
-Classic alloy drops on 80mm SR stem, 25.4mm clamp, 150mm drop, 39cm ctc at drops; £15
-3TTT Moscow bars on generic 80mm quill stem, 26mm clamp, 42cm ctc wide, drilled bitd at the front but uncut, scuffing on the clamp area from tri bars; £35 [SOLD]
-Nitto B123AA with 100mm Nitto Jaguar stem and Soyo grips, all NJS, 25.4mm clamp, 190mm drop, 40cm ctc at drops; £75
-Aero bars, generic alloy but fully adjustable, great for setting up, 25.4mm-26mm clamp; £15
Attachments
-
bars1.jpg715.8 KB · Views: 47
-
hubs2.jpg726.3 KB · Views: 46
-
hubs1.jpg672.6 KB · Views: 39
-
hub2.jpg62.1 KB · Views: 37
-
hub1.jpg64.2 KB · Views: 44
-
brakes2.jpg818.8 KB · Views: 54
-
brakes1.jpg806.3 KB · Views: 53
-
bars4.jpg804.5 KB · Views: 57
-
bars3.jpg899.8 KB · Views: 42
-
bars2.jpg843.7 KB · Views: 47
Last edited: