synchronicity
Senior Retro Guru
Anyone happen to know the outer diameter of hope disc brake rotor rivets?
Anyone know the outer diameter of hope disc rotor rivets?
- Thread starter synchronicity
- Start date
muddytreker
Dirt Disciple
Floating Hope Rotor outside Rivot OD ( as pictured ) there is of course and inside portion of the rivot,
which is the pressed side, no pic you want one ?
Some folk get terminology mixed up, so in case its the mount bolt heads ? ( see pics )
which is the pressed side, no pic you want one ?
Some folk get terminology mixed up, so in case its the mount bolt heads ? ( see pics )
synchronicity
Senior Retro Guru
Yes for floating rotors...
But no that's what I meant. That's the outside flange diameter.
I need the shaft diameter of the floating rivets.
Not the inner diameter of the rivet hole either.
But no that's what I meant. That's the outside flange diameter.
I need the shaft diameter of the floating rivets.
Not the inner diameter of the rivet hole either.
muddytreker
Dirt Disciple
A tricky size to accurately measure unless you have a retired floating rotor to perhaps
disassemble as both rivot flanges cover the core, will have another look later see if maybe
a feeler guage can get in the expansion gap, will let you know.
Maybe check tech section on hopetech website see if any info there, or perhaps call hope.
disassemble as both rivot flanges cover the core, will have another look later see if maybe
a feeler guage can get in the expansion gap, will let you know.
Maybe check tech section on hopetech website see if any info there, or perhaps call hope.
muddytreker
Dirt Disciple
muddytreker
Dirt Disciple
Whats yah reason for this ? some project you wanna use the rivot types on ?
