Ant's fork graveyard....

Antstark

Gold Trader
Cannondale Fan
Feedback
View
I am fed up of tripping over these everytime I go into the shed :roll:

Prices are PP friends and family or add 5% to cover fees etc and include delivery to the UK. Overseas is likely to be much more than most of these forks are worth !...but ask anyway :D

So for the purposes of this post all forks should be considered as "spares or repairs" condition. I have commented the good and bad as I see it but have not tested any of them recently. Prices should reflect this and the fact forks are a real pain and expensive to post :D

1) Rock Shox SID 1 1/8 195mm. Spares. Just lowers and crown. No innards at all. Crown and legs seem in great condition with slight marking where the seals sat, lowers have lost most of the stickers and have a number of chips - £22



5) Marzocchi MZIII lowers only. Pretty good cosmetically - £9

8 ) Supersize straight blade steel forks in a deep red colour. Not sure of exact make. 1 1/4 152mm 55mm of thread Nice - £17 NOW £15

9) Tange Super Big fork b]1 1/4[/b] 163mm 40mm of thread . Getting harder to find these especially in this size. Will need refinishing as has some slight surface rust - £22

SOLD

2) 1998 Magnum SX-R in Mango 1 1/8 220mm - V brake and disk. Seem to work perfectly although would probably enjoy a quick service. Microlube system. All adjusters seem to turn freely. Think these are elastomer. - £40 SOLD PP
3) Marzocchi Bomber Z5 Open Bath 1 1/8 184mm. V brake only. Nice forks but have a slight oil leak from one leg. Dead easy to service with loads of spares available. - £25 SOLD PP
6) Rock Shox Quadra10 1 1/8 180mm. Cosmetically and functionally all seems fine. Pulled up the boots to have a quick peek and the stantions are all good and rust fee. Some paint loss on the bridge which is common. Cant and V brake only. - £25 SWAPPED :D
4) Manitou Magnum 1 1/8 220mm. V Brake and disk. Tons of travel on these. Seem to work just fine. Would probably enjoy a quick service. Microlube system. Preload adjuster seem to turn freely and works well - £23 SOLD £20
7) Rock Shox Mag10 (I think..no adjusters) 1 1/8 125mm with 28mm thread. Cosmetically good. Crown and stantions are very good. They compress smoothly enough and may just need a quick pump up to get them working. Not tested so - £28 SOLD PP
 

Attachments

  • IMG_2242 (Custom).JPG
    IMG_2242 (Custom).JPG
    224 KB · Views: 1,164
  • IMG_2241 (Custom).JPG
    IMG_2241 (Custom).JPG
    228.3 KB · Views: 1,164
  • IMG_2240 (Custom).JPG
    IMG_2240 (Custom).JPG
    218.4 KB · Views: 1,165
  • IMG_2239 (Custom).JPG
    IMG_2239 (Custom).JPG
    192.3 KB · Views: 1,165
  • forkgrave.jpg
    forkgrave.jpg
    162.3 KB · Views: 1,165
Re:

more pics
 

Attachments

  • IMG_2252 (Custom).JPG
    IMG_2252 (Custom).JPG
    182.2 KB · Views: 1,160
  • IMG_2251 (Custom).JPG
    IMG_2251 (Custom).JPG
    178.6 KB · Views: 1,159
  • IMG_2249 (Custom).JPG
    IMG_2249 (Custom).JPG
    171.8 KB · Views: 1,159
  • IMG_2247 (Custom).JPG
    IMG_2247 (Custom).JPG
    169.5 KB · Views: 1,160
  • IMG_2245 (Custom).JPG
    IMG_2245 (Custom).JPG
    141.3 KB · Views: 1,160
  • IMG_2243 (Custom).JPG
    IMG_2243 (Custom).JPG
    212.1 KB · Views: 1,160
Re:

I think those Quadra 10's could be perfect for a little Kona project I have on the go at the mo.... :twisted:

Can't find any P2's for love nor money. Are you after anything at the mo, I'm just about to list a load of stuff? If not, can you PM me your payment details.....ta.

Kaz
 
Re: Re:

Hey Kaz...PM me with what ya got :D and I'll take a look

Ant

LikeClockwork":2ak5qiuw said:
I think those Quadra 10's could be perfect for a little Kona project I have on the go at the mo.... :twisted:

Can't find any P2's for love nor money. Are you after anything at the mo, I'm just about to list a load of stuff? If not, can you PM me your payment details.....ta.

Kaz
 
Re:

Not sold yet :D ......I need to get back to iscervo with answers to load of questions first.....mainly about the SIDs though.
 
Re:

Hi Ant,

Just to confirm, the Tange Big forks are 1 1/4" ?

I suspect so, but have to ask. Looking for a 1 1/8"

Thanks,

Mike
 
Back
Top