marc two tone
Retrobike Rider
- Feedback
- View
Hi all,
For sale are some manitou's that need elastomers/spring. And, some decent XT bits to start a clearout.
So, first up is these Answer manitou 3 is good condition although the elastomers are dead. All bolts have been turned a quarter to make sure nowt is seized. Steerer is 1.1/8" and 134mm.22mm of it is threaded.
Overall pretty clean and presentable, some tooling marks on the crown.
Posted to uk for £27.50. 1st class. was £30. SOLD
PAIR of XT mechs rear is m730, fairly tidy with usual patina, jockeys are decent. Front is m736 top pull 31.8mm, again, chain scrape etc but perfectly serviceable. Both have been clean so they can be assessed and handled, i can give them an extra scrub before dispatch. now sold
Posted for £17.50, the pair. to uk. 2nd class. was £20. SOLD
Next. XT 736 1.1/8" Headset, fairly tidy for a used headset, the top bearing surface is lightly pitted but no big deal when all greased up. It's all there inc crown race and caged bearings. SOLD
£10 posted to uk 2nd class. HEADSET SOLD
Sat 26/7, DX added!
MT60 chainset 170mm rings are 26/38/46, rings are good/very good. the arms are patina'd but tapers are bang on and all threads are good.
Middle is a lovely stronglight. ALSO alloy crank caps..wooooo! cleaned and ready to use.
£18 posted to uk address. SOLD
And, MT650 rear mech, regular length cage, good jockeys, all bolts n screws work, clean a ready to use. typical patina.
£8 posted to uk. SOLD
Sunday special!
XT LH shifter combo. m095, used effects but seems to work fine also with it is some 734 cantis. Two of the plastic spring retainers have been rubbed/ground away but doesn't affect function. I've fitted them to studs and nipped the bolts up, work fine. The pads are the same era XT with inserts, The insert have different degree of wear, so the whole cartridge setup are freebies for spares, really. No yokes/straddles though.
The lot.
Posted to uk for £11. SOLD
[
All parts used with general signs of usage although functional respectively. Forks will need elastomers though.
Please add to thread with interest first. paypal ok. ALL SOLD
thanks.
For sale are some manitou's that need elastomers/spring. And, some decent XT bits to start a clearout.
So, first up is these Answer manitou 3 is good condition although the elastomers are dead. All bolts have been turned a quarter to make sure nowt is seized. Steerer is 1.1/8" and 134mm.22mm of it is threaded.
Overall pretty clean and presentable, some tooling marks on the crown.
Posted to uk for £27.50. 1st class. was £30. SOLD
PAIR of XT mechs rear is m730, fairly tidy with usual patina, jockeys are decent. Front is m736 top pull 31.8mm, again, chain scrape etc but perfectly serviceable. Both have been clean so they can be assessed and handled, i can give them an extra scrub before dispatch. now sold
Posted for £17.50, the pair. to uk. 2nd class. was £20. SOLD
Next. XT 736 1.1/8" Headset, fairly tidy for a used headset, the top bearing surface is lightly pitted but no big deal when all greased up. It's all there inc crown race and caged bearings. SOLD
£10 posted to uk 2nd class. HEADSET SOLD
Sat 26/7, DX added!
MT60 chainset 170mm rings are 26/38/46, rings are good/very good. the arms are patina'd but tapers are bang on and all threads are good.
Middle is a lovely stronglight. ALSO alloy crank caps..wooooo! cleaned and ready to use.
£18 posted to uk address. SOLD
And, MT650 rear mech, regular length cage, good jockeys, all bolts n screws work, clean a ready to use. typical patina.
£8 posted to uk. SOLD
Sunday special!
XT LH shifter combo. m095, used effects but seems to work fine also with it is some 734 cantis. Two of the plastic spring retainers have been rubbed/ground away but doesn't affect function. I've fitted them to studs and nipped the bolts up, work fine. The pads are the same era XT with inserts, The insert have different degree of wear, so the whole cartridge setup are freebies for spares, really. No yokes/straddles though.
The lot.
Posted to uk for £11. SOLD
[
All parts used with general signs of usage although functional respectively. Forks will need elastomers though.
Please add to thread with interest first. paypal ok. ALL SOLD
thanks.
