Well my B4 framed turned up and I am chuffed.
Very much looking forward to this build.
I will need some F3xc forks, if any of you have some lurking.
Can I just check seat post is 31.8mm?
Looks to be bottom pull on the FD. Just run the cable under and up to the recessed hole? No guide so to speak on the bb for bare cable.
The pivot, just behind the bb, is just a tube with grub screws, no bolt with nut the whole way through which surprises me. I can see the issue of tightening too much and reducing movement, but if it were sleeved...
Will get a Rssie rear shock eventually, but front is more important. Does the rear shock lock to the rear triangle at the bottom or top near the spring adjuster. Or can or be set to change geometry? K notice on Dan's photos ir is locked at the bottom.
I'm thinking of using some conventional shocks (SID XC) on front to beginning with so can go either disc or rim. Need to sort an adapter lut cor the rear. Might look a a rear cable disc brake, similar to original bit ISo fitting.
Lots to think about, but very excited. Love it. My first full suspension bike!