AMP bushes

FST4RD

Senior Retro Guru
Hi all, the nylon bushes on my AMP are slogged out. Was going to get some more, but what about getting brass bushes spun up? Or will this be too hard on the links?
 
They have oil filled sintered bronze bushings available in many possible sizes just look at an online industrial supply catalog. Personally I would use Delrin, or even better try to fit needle bearings instead of the bushings (might require some custom axles though), but I don't have much experience with AMP forks.
 
Re:

Brass and Ali do not mix well together ! If its the nylon washers no to much of a problem to make them , i take it this is for the AMP fork , if it is , there is no room for needle roller bearings so you are stuck with DU bushes and if its an English size the top hat type are very hard to get hold of , as for the screws ( if its the fork and not the cir-clip type ) i still make them , not available any more . Any help .
 
Re:

Yeah its for the forks. They are the circlip style ones. Easy enough to get some spun up I guess.
Unless someone still stocks them?
 
Back
Top