ALL SOLD - Project 2s, Bombers and various retro Kona spares

[magas]

Re: Project 2s, Bombers and various retro Kona spares

stem sold ?

if not, I would take it.

I had a dibs on bar and stem from Canuck pending pics but not heard anything today, I'll see if they come back tomorrow.

no problem; just let me know if Canuck did not take it.

 

[surripere]

Re:

Bump ... Project 2s, Cane Creek cantis and STX chainset still available

 

[RickTheUncivil]

Re: Project 2s, Bombers and various retro Kona spares

Bomber forks arrived today, all good and well packaged.
Have a bump for the rest!

 

[Gregolas]

Re: Project 2s, Bombers and various retro Kona spares

Interested in the Project 2s. Needed for a 19" frame. Still available?

 

[surripere]

Re: Project 2s, Bombers and various retro Kona spares

Interested in the Project 2s. Needed for a 19" frame. Still available?

Yes, Project 2s still available.

They are off a 20" frame so you they wouldn't be a direct fit ... I had a measure of my 19" Cinder Cone and the headtube is 130mm, the threads on the forks come down to about 150mm and with a headset stack of around 30mm it might be workable without cutting more threads.

However, my thinking on this may be flawed so don't rely on it plus there is a bit of thread damage about half way up the threads which is shown in one of the pictures and so you wouldn't want the main nuts to be tightning on this portion.

 

[Gregolas]

Re: Project 2s, Bombers and various retro Kona spares

Interested in the Project 2s. Needed for a 19" frame. Still available?

Yes, Project 2s still available.

They are off a 20" frame so you they wouldn't be a direct fit ... I had a measure of my 19" Cinder Cone and the headtube is 130mm, the threads on the forks come down to about 150mm and with a headset stack of around 30mm it might be workable without cutting more threads.

However, my thinking on this may be flawed so don't rely on it plus there is a bit of thread damage about half way up the threads which is shown in one of the pictures and so you wouldn't want the main nuts to be tightning on this portion.

Thanks. I should have the frame back in a few days. I'll measure up and get back to you. Unless someone else gets in there first.

 

[jonthefish]

Re:

I'm also interested in the P2s. Do you know if a nut will screw down ok past the damaged section of thread? Thanks

 

[surripere]

Re: Re:

I'm also interested in the P2s. Do you know if a nut will screw down ok past the damaged section of thread? Thanks

Good question ... will try when I get home and update later.

 

[saccades]

Re:

Would you post to Ireland (or parcel motel)?

First dibbs on the cranks depending on Postage/willingness to post.

 

[surripere]

Re: Re:

I'm also interested in the P2s. Do you know if a nut will screw down ok past the damaged section of thread? Thanks

Good question ... will try when I get home and update later.

Yes, I've been able to screw the nut all the way down, had to use a spanner when it got to the damaged area but put some lube on and it didn't require too much force. It screwed back up no problem.