abominable little bike (FRO inside) - C26 evolution
- Thread starter 24pouces
- Start date
You speak about a Yo Eddy… It's a possible evolution for the building. I'm going to built my Yo Eddy with no gear, and I have to check if the Bullseye would be OK on it.
For the Yeti : a classic M730 crank like Furtado or Tomac, or…
a special CookBros : I love the idea of white arm and purple spider…
For the Yeti : a classic M730 crank like Furtado or Tomac, or…
a special CookBros : I love the idea of white arm and purple spider…
yesterday, I cleaned the threaded hole of the left arm. So, I could tightening it seriously on the axle.
between each arm and each stay, there's 5mm. There's enough space for 3 chainring (46-36 and 24t).
Actually, I've got that :
As you can see, the bolt is on the spindle, and, I think it's enough for the pedaling rotation (a classic arm takes around 15mm on a square axle).
On this picture, there's half of the space free. This space is necessary for adjusting the crank.
On other hand, the friend who drilled me down the axle, will machine me an alloy cap for each arm for tightening the crankset longitudinally and to give more strong in the area.
between each arm and each stay, there's 5mm. There's enough space for 3 chainring (46-36 and 24t).
Actually, I've got that :
As you can see, the bolt is on the spindle, and, I think it's enough for the pedaling rotation (a classic arm takes around 15mm on a square axle).
On this picture, there's half of the space free. This space is necessary for adjusting the crank.
On other hand, the friend who drilled me down the axle, will machine me an alloy cap for each arm for tightening the crankset longitudinally and to give more strong in the area.
bmx4130crmo
Retro Guru
24pouces":1z2fa4al said:
You can use the stem caps from 1" Salsa or Cook quill stems, they are perfect.
Left cap have should be a bigger outer diameter so the cap will hold the arm of the spindle. All my Bullie Cranks got a keeper kit, so I have no problems.
broomhandle
Dirt Disciple
how is this build going?
i have also touched this frame! i cant wait....
i have also touched this frame! i cant wait....
bmx4130crmo
Retro Guru
newsboy":159azp4z said:
its the coirrect size for you
bmx4130crmo":2rddpi6a said:newsboy":2rddpi6a said:
its the coirrect size for you
Yes : we are 2 little men, but Newsboy only wants Merlin now
Why not asking to Chris Herting to bound some Easton C9 tubes to a MErlin frame and doing a Tomac's Raleigh Replica
