rovarcycles
Dirt Disciple
Hi there,
I have some chainrings left which I have made in the past two years using CNC. They are all meant for 50.4bcd cranks (Stronglight 49D, TA Cyclotouriste, etc.), made from AL7075 with CNC chainring bolts made from stainless steel. Some are replicas of well known (and pretty rare) French chainrings and some are designed by me. Most of them are 46-30T doubles, the Stronglight Diamond and the one I call Narcisse (has nothing to do with the French constructeur) are 46-28T. I also have one triple (TA Adaptateur, 46-38-XXT, XX can be any standard TA Cyclotouriste small ring) and one narrow-wide 1x 34T ring for 1x setups (up to 12 speed). The teeth (except the ones on the 1x ring) are not optimized for modern setups (in case you were wondering). The rings are slightly polished and waxed by hand to remove most of the machining marks, but some minor machining marks are still visible. The 1x rings are silver anodized.
I have some other CNC projects in mind, so selling these rings will help me a lot to finance future CNC projects.
Doubles. From top left to bottom right in the first picture below:
1 - Simplex Touriste 46-30T, 195 euros per set
2 - Cyclo Rosa 46-30T, 215 euros per set (all sold)
3 - Stronglight Diamond 46-28T, 225 euros per set
4 - "Herse Verot" 46-30T, 195 euros per set (only one left!)
5 - Hermes 46-30T, 195 euros per set
6 - Narcisse 46-28T, 215 euros per set
Triple:
1 - TA Adaptateur 46-38-XXT, 290 euros per set
Single 1x narrow-wide:
1 - Herse Verot 34T, 90 euros per set
I am based in the Netherlands but shipping to anywhere in the world is not a problem. Shipping to anywhere in the world is about 15 euros and I can ship it as a gift (so no tax). I accept PayPal (friends and family please or with an extra tax).
Let me know if you have any questions.
I have some chainrings left which I have made in the past two years using CNC. They are all meant for 50.4bcd cranks (Stronglight 49D, TA Cyclotouriste, etc.), made from AL7075 with CNC chainring bolts made from stainless steel. Some are replicas of well known (and pretty rare) French chainrings and some are designed by me. Most of them are 46-30T doubles, the Stronglight Diamond and the one I call Narcisse (has nothing to do with the French constructeur) are 46-28T. I also have one triple (TA Adaptateur, 46-38-XXT, XX can be any standard TA Cyclotouriste small ring) and one narrow-wide 1x 34T ring for 1x setups (up to 12 speed). The teeth (except the ones on the 1x ring) are not optimized for modern setups (in case you were wondering). The rings are slightly polished and waxed by hand to remove most of the machining marks, but some minor machining marks are still visible. The 1x rings are silver anodized.
I have some other CNC projects in mind, so selling these rings will help me a lot to finance future CNC projects.
Doubles. From top left to bottom right in the first picture below:
1 - Simplex Touriste 46-30T, 195 euros per set
3 - Stronglight Diamond 46-28T, 225 euros per set
4 - "Herse Verot" 46-30T, 195 euros per set (only one left!)
5 - Hermes 46-30T, 195 euros per set
6 - Narcisse 46-28T, 215 euros per set
Triple:
1 - TA Adaptateur 46-38-XXT, 290 euros per set
Single 1x narrow-wide:
1 - Herse Verot 34T, 90 euros per set
I am based in the Netherlands but shipping to anywhere in the world is not a problem. Shipping to anywhere in the world is about 15 euros and I can ship it as a gift (so no tax). I accept PayPal (friends and family please or with an extra tax).
Let me know if you have any questions.
Attachments
Last edited:
