36 hole Mavic hubs 126mm on the rear (sorted)

[over15degrees]

Hello, looking for a set of Mavic hubs or just the front. Both with 36 hole, looking for 126mm spacing.

Cheers.

(just to be clear, hubs for road, not MTB. Thanks)

 

[over15degrees]

Re: 36 hole Mavic hubs 126mm on the rear

Now looking for 36 hole hubs, or possilbly just the front. Thank you.

 

[Inmish Ed]

Re:

Hi
I've a mavic front hub (not sure of model , maybe 531) it's on a mavic open sup rim
Looking for £50 for the wheel, it has the mavic skewer

 

[over15degrees]

Re: 36 hole Mavic hubs 126mm on the rear

I have a set of rims just looking for the hubs.


thanks for the reply though!

 

[Mike Muz]

Re:

I have a set of 36 hole Mavic 501s with 126mm rear . . . . . .




And I'm looking for some rims to go with them :roll:

Always the way isn't it !

mike

 

[over15degrees]

Re: Re:

I have a set of 36 hole Mavic 501s with 126mm rear . . . . . .




And I'm looking for some rims to go with them :roll:

Always the way isn't it !

mike

I know right?!

there are quite a few NOS mavic rims on ebay, on the other hand the hubs are gold dust, apparently...

 

[latman]

Re: 36 hole Mavic hubs 126mm on the rear

501 hubs have a black ring around the NDS bearing and the rearhub is 126 or 130mm OLD with a spacer , model 500 and 550 were bare and 100mm front /126mm rear only

 

[latman]

Re: 36 hole Mavic hubs 126mm on the rear

531 hubs were for MTB (135 OLD rear) Immish Ed and have a green ring around the outside of the bearing for reference

 

[over15degrees]

Re:

Are these for sale? Or are you just informing me on the different hubs?

 

[latman]

Re: 36 hole Mavic hubs 126mm on the rear

just informing sorry , If you get a choice of 7 speed rear hubs the 550s are stronger than the 500s IMO due the the DS bearing placement. the 550 design concept was then used for every screw on rear hub Mavic made (where the DS bearing is at the extreme outside of the shell)