2x Pace RC36 EVO Proclass forks

jimmymoss

Retro Newbie
Right having a bit of a clear out and I stumbled upon these beauties.

Pair one.

Very good condition but with no sitckers unfortunately. The Ti coating on the stanctions is slightly worn around the seals as normally happens with these but there is very little wear to what I would expect to see with the Pace Ti coating. They have bolt on canti mounts and the steerer is 185mm long but replacement ones are easily slotted into place.

Pair two.

These were crashed pretty heavily and I managed to kink the top of the stanctions and there is what looks to be a superficial crack in the carbon on the rear of the left leg. For obvious reasons I can't be sure how supercial the crack is. The stickers are a little scruffy looking but still all there. The crown has no marks to speak of and the steerer is just over 175mm from the top of the crown.

Both pairs have been in a box for the last 4/5 years so are bound to require a bit of a service. From memory though this was really simple stuff.

I have a feeling that I may have a complete set of new stickers somewhere at my parent's house - I will check into this if there is some interest out there.

Not entirely sure on price but both pairs, plus the original Pace grease gun must be worth £100.

Anyone interested let me know on here and I will email some photos across.

Thanks, James.
 
Yep, there is one pair of V brake mounts.

If you drop me an email to jimmymoss355AThotmail.com I will send you through some pics.

Thanks, J.
 

Latest posts

Back
Top