Wanted 25.0/25.4/26.0 black seatpost (retro or modern)

[Fatal Swan]

My first retro project in a while needs the following:

A black 26.0mm seatpost. Normal kind of length, something like 350mm should be ample. Something like a 25.0 USE or a 25.4 that I could shim to 26.0 would be ok in principle, only it needs to be black and ideally a setback type rather than an inline one like the old USEs. Modern or retro is fine.

Some 1" threadless headset spacers, in black SORTED (thanks ishaw)

A top-pull 28.6 LX/XT/XTR front mech SORTED (thanks Blackers)

And a random modern request in case anyone happens to have them - some spacers for a Shimano Hollowtech II BB.

Cheers!

 

[Blackers]

Xtr 28.6 front mech ?

 

[ishaw]

Pretty sure I have lots of 1 inch spacers in black, possibly red maybe?

 

[Fatal Swan]

Front mech and headset spacers now sorted - I could still do with a black seatpost (26.0 or a 25.0/25.4 that I can shim)

 

[mk one]

Cheap enough new if you are not bothered about branding -

https://www.ebay.co.uk/itm/393315401519?hash=item5b936cbf2f:g:J1cAAOSwBfNgnVO2

 

[Fatal Swan]

Yes that's not a bad shout, thanks! I was hoping to save a bit of weight by changing the existing post, though the 26.0 size limits the options for that! The current one is over 400g so if it's anything like the advertised weight of approx 290g then that's not a bad saving. I'll see if anything fancier turns up in the meantime and go for this one if not!