2000 Scott Boulder rebuild.

Dface

Retro Guru
See if I can make it roadworthy for less than a tenner.
 

Attachments

  • IMG_3088.jpeg
    IMG_3088.jpeg
    1.3 MB · Views: 9
  • IMG_3099.jpeg
    IMG_3099.jpeg
    923.5 KB · Views: 6
  • IMG_3096.jpeg
    IMG_3096.jpeg
    885.2 KB · Views: 5
  • IMG_3095.jpeg
    IMG_3095.jpeg
    861.3 KB · Views: 5
  • IMG_3094.jpeg
    IMG_3094.jpeg
    1 MB · Views: 4
  • IMG_3093.jpeg
    IMG_3093.jpeg
    956.6 KB · Views: 4
  • IMG_3092.jpeg
    IMG_3092.jpeg
    1 MB · Views: 4
  • IMG_3091.jpeg
    IMG_3091.jpeg
    978 KB · Views: 4
  • IMG_3089.jpeg
    IMG_3089.jpeg
    907.3 KB · Views: 7
  • IMG_3097.jpeg
    IMG_3097.jpeg
    1.1 MB · Views: 8
Looking good!

From the state of the grips, brake blocks, and chain rings it doesn't look like it's seen many miles.

Might even be able to get change out of that tenner!
 
Looking good!

From the state of the grips, brake blocks, and chain rings it doesn't look like it's seen many miles.

Might even be able to get change out of that tenner!
Paint is nice and shiny. Plenty of chips on it though. I reckon its last 2 miles have been getting moved around the garage from wall to wall.
 
Bit of a flash in the pan but it only wanted a clean, couple of rubber boots for the v pipes, the gear levers unseizing and a quick link to rejoin the chain that wasn’t worn. Quite tidy really.
 

Attachments

  • IMG_3203.jpeg
    IMG_3203.jpeg
    904.2 KB · Views: 14
  • IMG_3204.jpeg
    IMG_3204.jpeg
    836.2 KB · Views: 12
  • IMG_3205.jpeg
    IMG_3205.jpeg
    578.2 KB · Views: 9
  • IMG_3206.jpeg
    IMG_3206.jpeg
    527.8 KB · Views: 9
  • IMG_3207.jpeg
    IMG_3207.jpeg
    538.5 KB · Views: 9
  • IMG_3209.jpeg
    IMG_3209.jpeg
    851.5 KB · Views: 7
  • IMG_3210.jpeg
    IMG_3210.jpeg
    576.2 KB · Views: 8
  • IMG_3208.jpeg
    IMG_3208.jpeg
    531.6 KB · Views: 14
Back
Top