1997 Marzocchi z2 Bams £50 posted!

[merlinbykes]

As above, I have a pair of z2 in good working order. Both have been serviced this year. There is only one steerer and crown but not a problem as they are the bolt on type. The reason for 2 sets is a swap from disc to v and only had an I.S disc caliper which the first z2 won't accept.

Anyway one set had seals and oil change, the other set which are the ones with vbrake bosses had bushings, seals, oil change and a new damper cartridge which cost £70 on its own!

Steerer is 200mm if not more.

Im wanting £120 posted for the lot.

Pics below,

Lastly I also have a Proflex 656. In awesome condition for age.
Recently had new brake blocks, cables and tubes.

£130 collected or £155 posted.

 

[merlinbykes]

Will throw in the recently bled Hope C2 brake too!

 

[jimmy5willy]

Which caliper is on the C2?

 

[merlinbykes]

Can't remember off the top of my head, but it is international standard and to be used with a 160mm rotor. Will check tomorrow and report back.

 

[chiru555]

steerer marzocchi

very important the exact steerer length

thanks

 

[RockiMtn]

again, red… why! free bump!

 

[merlinbykes]

Shall get steerer length tomorrow buddy

 

[merlinbykes]

Ok, so the hope c2 brake is a number 5.
The steerer length is 195mm but I do have a new steel steerer that will give you 230mm once fitted. This can be had for an extra £10

Cheers Jay

 

[ba57ards]

Would be interested in the c2 brake if the person who buys the forks doesn't want it

 

[chiru555]

fork

i would like the fork with both steerers(with 230 1 1/8 fitted). price please, including ship to Spain

thanks