1996 Kona Kula. SOLD

[Josh#78]

Up for sale is this nice 1996 Kona Kula. It has been stopped since 1998 in the cellar, and had just one unique owner.

Bike check is as follows:

Frame: 19" Kona Kula. Easton Elite tubing made in USA. Just some chainsuck, some little chips,and the "A" from Kona in the left side of the frame is missing due to continued friction of a portable minipump. Otherwise the gold satin paintjob is really nice. No cracks or dents.
Fork: Rock Shox Mag21, in general good conditions. Some marks on the decals, otherwise holds air and works fine, but I think a general service on it after so long time will be needed.
Wheels: Mavic Crossland SUP complete wheelset, in very good conditions.
Tyres: Hutchinson Scorpion in good conds.
Bar: Kona Race Light in very good conds.
Stem: 3T Forge Ahead in very good conds.
Barends: Unknown alu
Seatpost: Kona Race light in very good conds.
Saddle: Selle San marco Concor "no slip system". Well used.
STI brake/shift levers: Shimano Deore XT SLR Plus (m73 in very good conditions.
Front mech: Shimano XTR m900 in very good conds.
Rear mech: Deore XT (m737) in very good conds.
Cantis: Deore XT (m73 in very good conds. Front with XT replaceable barke pads, rear with KoolStop pads.
Chainset: Shimano Deore LX (m569) quite worn logos but in good overall conditions.
Pedals: Shimano PD-m520 in very good conds.

I´m looking for just 350€ - 260£ FOR THE COMPLETE BIKE. Shipment from Spain will be at cost (have to check it, but usually is something between 65-80€). NOW SOLD.

Payment via PayPal as a gift. Dibs here then follow by PM, please.

Cheers,

Josh

 

[Josh#78]

Re: 1996 Kona Kula

And some more detailed pics:

 

[Josh#78]

Re: 1996 Kona Kula

Bump.

 

[Kona-Ian]

Re: 1996 Kona Kula

How bad is chainslap on that?
Got a closer pic?

 

[Josh#78]

Re: 1996 Kona Kula

How bad is chainslap on that?
Got a closer pic?

Hi Kona-Ian

Here you have a close up of this part of the frame. It has the habitual chainsuck on it, plus some other marks made with the pedals of another bike while storing them. Apart from this, there are no cracks or dents.

Anyhow it can be covered with a neoprene protector or something similar, The rest of the frame paintwork is just OK as you can see on the other pics.
If any doubt, please drop me a PM. ;-)

Cheers

Josh

 

[Kona-Ian]

Re: 1996 Kona Kula

Thanks for the reply there. Yes, could fit a Lizard Skin.

 

[Josh#78]

Re: 1996 Kona Kula

New reduced price. ONLY 350€ or 260 pounds FOR THE WHOLE BIKE excl. shipment.

 

[haggis]

Re: 1996 Kona Kula. New reduced price!

Sending PM and dibs

 

[Josh#78]

Re: 1996 Kona Kula. New reduced price! SOLD P.P.

Bike already SOLD to Mr. Haggis, pending payment.

 

[Josh#78]

Now sold.