1995 DBR Axis Team Titanium frame 18"

[iveto1983]

I didn't plan on selling this, ever, but I'm short on money, and this is not currently built up. :roll:
Included is a Chris King headset, KCNC seat clamp and a Thomson seatpost.
The frame is currently in my loft, so I don't have any close up pics yet, but I'll add some over the weekend.
It's in very good condition, bar a tiny amount of chainsuck, and a small mark under the downtube near the BB.

I want £425 posted in the UK via paypal or bank transfer.

 

[xced]

nice.
is the 18" c to c or c to top ?
how long is the top tube?

 

[Splatter Paint]

Also, can you confirm: Head tube length, seatpost size, front mech size and bottom bracket shell width, please?

Ta.

SP

 

[iveto1983]

Some dimensions:

it's actually 19" centre to top, 17.5" centre to centre.
the frame number confirms it's an 18" frame though, DBR181437
the top tube is 22.5"
head tube is 4.5"
seatpost is 27.0, front mech is 31.8
bb shell is 68mm

 

[T'boo Ted]

Ba! If only I had some money...

 

[Splatter Paint]

With the Fox F80s fitted, did you have to run with a lot of sag, or was the frame ok with an 80mm fork?

SP

 

[iveto1983]

I didn't run much sag on the fork, just set them for my weight.
I had the same fork on my Kona Hot first, and they suit the Axis better. They relaxed the angles more on the Hot than on this, even though this is slightly older.

 

[Sidewinder]

OOps wrong thread

 

[Diamondbackracing]

Very Nice!

Are you willing to post to Australia???

Also, do you have any of the XTR stuff on the bike for sale.....

Cheers

BTW an 80mm fork is perfect for this frame; I used to have one with an 80mm Fox fork and it was the bomb. I'm pretty sure as standard spec they came with an 80mm Manitou fork back in the mid 90's

 

[T'boo Ted]

origianlly a manitou 3, with 2, extendable to 2.5 in then a marzocchi something xc400 maybe... my steel version ran fine at 2in manitou 3, even better at 2.5 (DH config), runs fperfect (3 i think), also ran fine with a 3in judy, but was no good with 4in fork (same geometry)