1993 saracen sarhara

[eddieneil22]

can anyone point me in the right direction to buy parts for my 1993 saracen sarhara,i want to bring it back to life,the shocks have seen there last days,they are max shocks as from factory.
would be very greatfull if anyone could help.

thanks eddie from harlow

 

[eddieneil22]

my bike befor work begins on it looking for parts forks cheap

 

[eddieneil22]

fixed my forks

i brought some 3.3mm thick springs from euro springs,i cut them to 45mm
inserted them into my forks ,i have the some firmness as if my bike was new,cost 7 pound. the ride height is as it sould be,,sorted.

 

[ishaw]

Bargain repair

 

[eddieneil22]

reply

yea worked out well,once i found a long reach extension bar and 6 mm
hex piece and a very bright torch to see down the fork tube,not as factory,but works well,,

 

[Mr Panda]

what was the part number from euro springs?

 

[eddieneil22]

reply

hello,
go on e bay,put in compression springs,look for euro springs company,
then contact joanne through message,ask for spring size.

125mm long
2.34mm wire
22.2mm outside diameter 2.75£ +p&p

then cut spring to 45mm,they fit nice.

bit of hard work fitting them but they do work well

they also do a firmer spring i used could do being a bit softer
try below or buy both see whats best

152mm long
3.3mm wire
19.45mm outer diameter 4£ each
best of luck eddie

 

[warpedboy2]

COOL!!!

This was my first ever "proper" bike. I ended up putting LX kit on it, and manitou forks, then some tw@t knicked it