Selling my 1991 Litespeed Fat Bastard. You can read about it here. Built by Litespeed for Cambria Bike Outfitters with the geometry and tube sizes of a Yo Eddy.
M/L size: 128mm headtube, 55cm seat tube (C-T), 57.5cm sloping TT. Takes a ~395-410mm axle-crown fork with a 1 1/8" steerer.
In good condition apart from some light chainsuck and various scratches that could be removed with a scotchbrite pad. Includes the headcup shims, probably original, which take it down to 1 1/8". There are bosses (not seized) for an anti-chainsuck plate that I don't have (although I have the dimensions) and for a roller if you use a bottom pull front mech.
Like a Yo, the frame takes a 29.4mm seatpost, but I'll leave in an alloy shim (removeable) I made, as I couldn't find one long enough to extend below the TT join. The shim is sized for a 27mm seatpost but, if needed, a few minutes with some wet and dry and it would fit a 27.2mm post.
Please get in touch with any questions. £550 posted to the UK. Overseas postage available at cost.
M/L size: 128mm headtube, 55cm seat tube (C-T), 57.5cm sloping TT. Takes a ~395-410mm axle-crown fork with a 1 1/8" steerer.
In good condition apart from some light chainsuck and various scratches that could be removed with a scotchbrite pad. Includes the headcup shims, probably original, which take it down to 1 1/8". There are bosses (not seized) for an anti-chainsuck plate that I don't have (although I have the dimensions) and for a roller if you use a bottom pull front mech.
Like a Yo, the frame takes a 29.4mm seatpost, but I'll leave in an alloy shim (removeable) I made, as I couldn't find one long enough to extend below the TT join. The shim is sized for a 27mm seatpost but, if needed, a few minutes with some wet and dry and it would fit a 27.2mm post.
Please get in touch with any questions. £550 posted to the UK. Overseas postage available at cost.
