1990 Yeti Ultimate (California Bike) COMPLETE Page 5
- Thread starter Smithjss70
- Start date
Smithjss70
BoTM Winner
- Feedback
- View
Re: 1990 Yeti Ultimate (California Bike)
Thank you Norman and Felix!
Thank you Norman and Felix!
Smithjss70
BoTM Winner
- Feedback
- View
Re: 1990 Yeti Ultimate (California Bike)
Hi Ferry. Fork, bar, stem grips rims, hubs, saddle, post, cranks, chain rings etc. are black. Black Porcs as well. Orange logo variety.
Hi Ferry. Fork, bar, stem grips rims, hubs, saddle, post, cranks, chain rings etc. are black. Black Porcs as well. Orange logo variety.
Smithjss70
BoTM Winner
- Feedback
- View
Re: 1990 Yeti Ultimate (California Bike)
Just got the frame, fork, stem and cranks back from powder this week. The coater murdered it...knocked it out of the park!
Color match is 100% as it should be. He has a history with Yeti and Spectrum so is intimately familiar with all the components and colorways they used.
I installed the seat tube, clamp, Ringle skewer, water bottle bolts and FD pulley last night with some super trick white lithium grease and will start stringing it up this weekend. Keeping fingers crossed the Bullseye cups and bearings work out. Thanks Pete for your help here.
Fork work
Stem detail
The ATAC stem will ultimately head to Vermont for Frank to perform the "Team" cuts. The Yeti/FTW stem below is now out for black powder so I won't be without a stem at any point.
Bullseye love
Super stoked to finally add a correctly-sized Ultimate to the Yeti quiver. I know this isn't everyone's color choice but I have a few Yetis in more traditional colors and wanted something a tad different.
Just got the frame, fork, stem and cranks back from powder this week. The coater murdered it...knocked it out of the park!
Color match is 100% as it should be. He has a history with Yeti and Spectrum so is intimately familiar with all the components and colorways they used.
I installed the seat tube, clamp, Ringle skewer, water bottle bolts and FD pulley last night with some super trick white lithium grease and will start stringing it up this weekend. Keeping fingers crossed the Bullseye cups and bearings work out. Thanks Pete for your help here.
Fork work
Stem detail
The ATAC stem will ultimately head to Vermont for Frank to perform the "Team" cuts. The Yeti/FTW stem below is now out for black powder so I won't be without a stem at any point.
Bullseye love
Super stoked to finally add a correctly-sized Ultimate to the Yeti quiver. I know this isn't everyone's color choice but I have a few Yetis in more traditional colors and wanted something a tad different.
Smithjss70
BoTM Winner
- Feedback
- View
Re: 1990 Yeti Ultimate (California Bike)
Thanks Pete. I have a local machine shop willing to turn the axle down to 22mm if I'm not happy with the cup bearings. I just detest the thought of using an aftermarket BB unless it's a modern Euro Bullseye which are as difficult to source as the cranks. Thank you again for the intel.
Thanks Pete. I have a local machine shop willing to turn the axle down to 22mm if I'm not happy with the cup bearings. I just detest the thought of using an aftermarket BB unless it's a modern Euro Bullseye which are as difficult to source as the cranks. Thank you again for the intel.
fiendish feet
Retro Guru
Re: 1990 Yeti Ultimate (California Bike)
A work of art
A work of art
Similar threads
