1989 Saracen Kili Flyer Competition
- Thread starter drystonepaul
- Start date
- Feedback
- View
A few of the parts for this build have arrived/been found/cleaned up and most importantly painstakingly photographed to document progress.
First of all that rogue ball bearing from the rear XT hub turned up hiding in plain site on the workshop floor. It was doing a passable impersonation of the one of Jupiter's moons. Understandably it was replaced along with it's other corroded 17 siblings.
All builds from a certain period must include a NOS XT sharkfin. I shall dutifully comply with this rule.
A quick look on the mezzanine looks promising...
I knew I had this somewhere. It's going to need some black chainrings though.
First of all that rogue ball bearing from the rear XT hub turned up hiding in plain site on the workshop floor. It was doing a passable impersonation of the one of Jupiter's moons. Understandably it was replaced along with it's other corroded 17 siblings.
All builds from a certain period must include a NOS XT sharkfin. I shall dutifully comply with this rule.
A quick look on the mezzanine looks promising...
I knew I had this somewhere. It's going to need some black chainrings though.
- Feedback
- View
Sorted for M733 2 finger brake levers
There is one pair there with matching hoods, which will be just enough.
There is one pair there with matching hoods, which will be just enough.
- Feedback
- View
This was a recent eBay purchase. I watched it for a couple of weeks hoping the price would drop. I was initially a bit dubious about it's condition when I unwrapped it, but it has cleaned up very nicely.
I present to you an XT M730 bottom bracket.
It's almost a shame it'll be all hidden away inside the frame.
I present to you an XT M730 bottom bracket.
It's almost a shame it'll be all hidden away inside the frame.
- Feedback
- View
Now we are getting to the exciting stuff...
This arrived from Serbia yesterday and is one of the parts I expected to be very difficult to find.
NOS Deore XT Biopace II 46 tooth chainring in black
This arrived from Serbia yesterday and is one of the parts I expected to be very difficult to find.
NOS Deore XT Biopace II 46 tooth chainring in black
- Feedback
- View
Lovely stuff.
- Feedback
- View
I know it's been less than 24 hours since my last update, but I can tell from the deluge of responses to this thread that many of you are now eagerly anticipating what comes next.
Especially after that close up photo of a rusty 1/4 inch ball bearing...
So to ease the suffering of all of you sat there shivering in the cold sweats of withdrawal, here are some more photos of bike parts accompanied by pithy comments.
Who knew that I had a whole spare pair of XT M732 cantilever brakes in black. Let's just all hope that that pot of bits has all the correct springs, bolts and covers.
The brake pads will be another matter entirely...
Nice to see that I have a couple of options for the XT M732 thumbshifters. While they are not perfect cosmetically I think I can get a passable set together for this one.
We may have a small problem here. One of the two top-pull XT front mechs here is virtually unused, the other one just needs a cable clamp bolt.
The thing is that I need a bottom pull mech and the one I have might be a bit too scruffy for this build.
Rear mechs should be okay, but they both need a bit of work. I'll be needing the short cage for this bike.
Especially after that close up photo of a rusty 1/4 inch ball bearing...
So to ease the suffering of all of you sat there shivering in the cold sweats of withdrawal, here are some more photos of bike parts accompanied by pithy comments.
Who knew that I had a whole spare pair of XT M732 cantilever brakes in black. Let's just all hope that that pot of bits has all the correct springs, bolts and covers.
The brake pads will be another matter entirely...
Nice to see that I have a couple of options for the XT M732 thumbshifters. While they are not perfect cosmetically I think I can get a passable set together for this one.
We may have a small problem here. One of the two top-pull XT front mechs here is virtually unused, the other one just needs a cable clamp bolt.
The thing is that I need a bottom pull mech and the one I have might be a bit too scruffy for this build.
Rear mechs should be okay, but they both need a bit of work. I'll be needing the short cage for this bike.
- Feedback
- View
I'm certainly tuned in mate so keep 'em coming! Love threads like this that document every part and just wish I had the patience to go in to so much detail myself!
Antwack
Senior Retro Guru
Crikey, nice find!
27motorhead
Old School Grand Master
- Feedback
- View
Lovely build this one. One of the best looking Saracen's ever produced. You have a quite a stash of parts! LOVE the Biopace logo, and what a find to find a NOS black chainring. It's coming along very nicely... keep up the good work 
