1988 Brodie Climbmax

Thanks Roy for sharing some Brodie catalogues. Attached are scans of one Roy had photo copied. Not sure of the year but pictured frames look around 87'. Kinda confirms my climbMax is likely Tange 4130 MTB tubing.

Maybe someone can upload this to the Brodie catalogue section
 

Attachments

  • Brodie 1987-88 Catalogue.pdf
    8.9 MB · Views: 52
I few minor updates, would say she's now done:

- Swapped the black bulge handlebar for a shim bar (slightly longer at 57.5cm too)
- Maxxis Ultralight tubes saved close to 100g off
- Alloy dust caps for the XT cranks
- Frame tubing decal
- Nice set of XT M732 canties still with SLR decal
- Found an alloy stem bolt cap that fits 😁

Been out a few times now and absolutely love the way she rides :cool:

20230611_173314472_iOS.jpg
20230611_173323063_iOS.jpg
20230611_173336293_iOS.jpg
20230611_173353194_iOS.jpg
20230611_173422529_iOS.jpg
20230611_173527947_iOS.jpg
20230611_173556388_iOS.jpg
20230611_173344344_iOS.jpg
20230611_173519306_iOS.jpg

Oh ya, scored a couple vintage brodie jerseys 😍

20230609_155407502_iOS.jpg
 
I few minor updates, would say she's now done:

- Swapped the black bulge handlebar for a shim bar (slightly longer at 57.5cm too)
- Maxxis Ultralight tubes saved close to 100g off
- Alloy dust caps for the XT cranks
- Frame tubing decal
- Nice set of XT M732 canties still with SLR decal
- Found an alloy stem bolt cap that fits 😁

Been out a few times now and absolutely love the way she rides :cool:

View attachment 748788
View attachment 748789
View attachment 748790
View attachment 748791
View attachment 748792
View attachment 748793
View attachment 748794
View attachment 748795
View attachment 748796

Oh ya, scored a couple vintage brodie jerseys 😍

View attachment 748797
Love it :cool: Dibs on the jerseys if you ever sell :)
 
Wonderfull. Good to read a thread about a bike that gets ridden in joy. Question: does the older wider canti brake better (power and modulation) than the compact later geometry?
 
Wonderfull. Good to read a thread about a bike that gets ridden in joy. Question: does the older wider canti brake better (power and modulation) than the compact later geometry?
In my experience I'd say they feel very similar. Note that on this build I'm using original (old and used) XT branded pads, I was surprised they still feel as good as they do. All in all though I don't notice much difference between power/modulation compared to the next gen lo profile canties
 
In my experience I'd say they feel very similar. Note that on this build I'm using original (old and used) XT branded pads, I was surprised they still feel as good as they do. All in all though I don't notice much difference between power/modulation compared to the next gen lo profile canties
Thank you for the feedback
 
A few recent changes: Canadian flag decal, NOS XT seatpost, velocity lower rise stem and XT quick releases.

I love the XT post, kinda the cherry on the top for me, the Interloc was nice but way too new for the build.

I also love the switch to the velocity stem. Lower rise and thinner profile, a prefect place holder until I find a Brodie stem.

The XT quick releases are pretty heavy but who cares? They just look right

I’d say it’s done unless I’m lucky enough to find a brodie stem or a gaterblade. No easy task but will be keeping my eyes open

20230713_231342942_iOS.jpg
20230713_231352106_iOS.jpg
20230713_231408643_iOS.jpg
20230713_231417724_iOS.jpg
20230713_231434613_iOS.jpg
20230713_231455970_iOS.jpg
20230713_231836666_iOS.jpg

20230713_232100509_iOS.jpg

Think it's time for another Brodie ride eh @Retro_Roy :cool:
 
Back
Top