19" Funk Com Pro frame and original CroMo rigid fork
First off, unfortunately international shipping out of North America from Canada is SILLY expensive, you're looking at a minimum of $160 by surface, no tracking or insurance. Hence why this FUNK frameset is priced lower than I'd want.
Frame and fork has been chemically stripped. Frame has minor crack in the weld at the top non-drive side of seat/top tube junction that can easily be repaired. No other structural damage present anywhere else. A few light dints, and I do mean "light" on the top tube. One top left a third from the front, one at top near the middle and again another one top left about a third from the back. The top hole of the bottle cage braze-on on the down tube had to be extracted and replaced. Some minor cable rub on head tube. Bottom bracket has been chased and threads are clean.
Asking $200 USD and will include two needed machined cable stops that screw into the drive side seat stay for the rear mech, an XT 7-spd f.mech w/cable stop adapter, 1-1/4" CT 150mm with rise stem that was stripped along side the frame/fork, another 1-1/4" CT black 135mm 0-rise stem, and one CT rubber stem top cover. Or take frame/fork only for $150.
NOW also includes an additional 1-1/4" headset in the packaged deal. HS is marked Japan - perhaps Diacompe/Tange brand?
More detailed photos available here:
https://picasaweb.google.com/1010880045 ... directlink
Also available for purchase along side the frame/fork are the following:
First off, unfortunately international shipping out of North America from Canada is SILLY expensive, you're looking at a minimum of $160 by surface, no tracking or insurance. Hence why this FUNK frameset is priced lower than I'd want.
Frame and fork has been chemically stripped. Frame has minor crack in the weld at the top non-drive side of seat/top tube junction that can easily be repaired. No other structural damage present anywhere else. A few light dints, and I do mean "light" on the top tube. One top left a third from the front, one at top near the middle and again another one top left about a third from the back. The top hole of the bottle cage braze-on on the down tube had to be extracted and replaced. Some minor cable rub on head tube. Bottom bracket has been chased and threads are clean.
Asking $200 USD and will include two needed machined cable stops that screw into the drive side seat stay for the rear mech, an XT 7-spd f.mech w/cable stop adapter, 1-1/4" CT 150mm with rise stem that was stripped along side the frame/fork, another 1-1/4" CT black 135mm 0-rise stem, and one CT rubber stem top cover. Or take frame/fork only for $150.
NOW also includes an additional 1-1/4" headset in the packaged deal. HS is marked Japan - perhaps Diacompe/Tange brand?
More detailed photos available here:
https://picasaweb.google.com/1010880045 ... directlink
Also available for purchase along side the frame/fork are the following:
