Wanted 165mm x 38mm Rear shock and bushings wanted

[BGR1978]

Hi,
I am after a couple of rear shocks for project Spesh FSRs I am working on. 165mm x 38mm needed. They don't have to be cosmetically beautiful but they need to work. I've got four FSRs and trying to get each of my family members one built up. Thanks in advance.
Rob

 

[2manyoranges]

Hi Rob - the problem often is you can get various shocks with the right stroke and eye-to-eye length (and spring if you are using coils) but not the bushing - so we often use these good folks who make up bushings at very low cost:

https://www.offsetbushings.com/?gclid=EAIaIQobChMI5-D15qiN8wIVgrbtCh2lHAEXEAAYAiAAEgIRwfD_BwE

 

[BGR1978]

Hi Rob - the problem often is you can get various shocks with the right stroke and eye-to-eye length (and spring if you are using coils) but not the bushing - so we often use these good folks who make up bushings at very low cost:

https://www.offsetbushings.com/?gclid=EAIaIQobChMI5-D15qiN8wIVgrbtCh2lHAEXEAAYAiAAEgIRwfD_BwE

Cheers. I had tried TFtuned and BETD to no avail. I shall try that company now. Thanks again.