Wanted 110bcd 4 arm 28 or 30 tooth narrow wide chainring

Minifreak

Old School Grand Master
Feedback
View
Hey guys,

As per the title please, rebuilding a 24” wheeled Genesis bike for my son, changing to a 1x from 3x system.

Happy to take complete chainset too with crank arms 150-155mm.

With thanks in advance.
 
These are cheap and pretty decent for the money.

 
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
These are cheap and pretty decent for the money.


Thank you Ian, really wanted 30, guess 2 more won’t make much difference?

Just noticed 104bcd as well.
 
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Bit more but 30t

Thank you again, getting closer but still 104bcd and not 110.

Might resort to buying this:

 
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Missed the 110bcd part. Had the same issue, well harder as it was the FSA asymmetric 110bvd. Found one in the end after searching for ages for one at a realistic price.

I see a few hope ones pop up on eBay at ok prices, but almost as much as your suggested cranks.
 
110 can't go that small - the teeth would be inside the bolts! There are a few 33T around, normally the smalles t is 34T.
 
Back
Top