Wanted 1 1/8" 700c disc fork needed (100mm QR)

[dyna-ti]

I recently bought a new e-bike(crc bargain/sales) only to find the fork blades are twisted. in that one is further forward of the other and given the type this is not repairable.

So I need a new fork to replace it.

Prefer steel, for disc as title, 1 1/8", length on the duff one is 235mm, so that at least. hub size is 100mmm QR.

Anyone ? or maybe advice or recommendations.

I was thinking about something like this
https://www.tritoncycles.co.uk/fram...c51/trek-steel-district-disc-700c-fork-p22068
Its obviously for an ebike, which weighs 20kg, and im a bit of a fatty these days(middle aged is a perfectly reasonable excuse) and come in at about 14 stone, so just wondering if that combined weight would be ok on this type of fork. I have no experience of roadie stuff, so ive no base of experience to work from.
The bike is just really to be used for pottering to the shops or into town. nothing rough or bouncy

 

[bikeworkshop]

You need to measure the "axle to crown" on your current fork. As a rule you can go 20mm shorter.

I'm sure this trek one is too short - you will end up with very disturbing handling.

We do quite a few rigid "upgrades", specially on ebikes. Some lengths are hard to find.