Search results

I'll take the SDG saddle please, pm me with postage cost & address for PayPal. Ta

My son has one of these from new, ride really quite nicely 👍

Re: You are drop bar or flat bar type disc brakes - I've some cheap shimano flat bar ones going?

Re: 100mm travel fork with V mounts Marzocchi Gran Fondo at 105mm travel any good to you? The downside being they need the special Marzocchi vee brake adaptors which I don't have and they need a service, otherwise black & destickered. PM me if interested. Ta

Re: Got a spare front wheel going, happy to sell either of the following, neither quite match your brief though :roll: 1. Nukeproof generator hub, 32 sapim strong spokes & Mavic en321 rim, with new 180mm 6 bolt shimano disc, the hub has end caps for QR, 15mm or 20mm axles but I don't have a...

Centrelock or 6 bolt disc?

What cranks are fitted?

I have some mavic ma40 rims 36h front 40h rear on campag front & unknown rear hub if that interests you, but rear hub is 135oln.

I hear this argument quite a lot, but despite not being a particularly fast cyclist always found 44t to 11t was not enough for a road based 26" wheeled bike. Another option out there is you can get eccentric front mech spacers so the mix of mtb & Road chain lines can potentially be overcome

Re: Hi, are the rotors still available? Thanks

Re: I've got a 20mm one you can have, pm me your address and I'll pop it in the post for you.

X Fusion Strate any good - used but not by me as it was too tall, 31.6mm internal cable routing, 150mm drop, approx 345mm from min insertion line to seat rails just looking to get back some of what I paid (£50), pm me for photos.

Unfortunately 20mm axle is 110mm wide so caps have to be swapped otherwise you'd end up with 110mm wide qr's....

Thanks - I already have 20mm ones, just wanted qr ones for when I put rigid forks on our tandem

Re: Still trying to find one of these :(

Re: El guapo front hib QR adapters Sorry about the quality of the photo, they are a universal converter that converts any 15mm x 100 hub to QR, I've used it on a fair few.

Re: El guapo front hib QR adapters They are universal, so should work no problem, I'll get a photo later.

Re: XTR m965 brakes & Pauls Thumbies Both calipers bolt direct to IS mounts on frame and forks, the front caliper will only worh with a 180mm disc rotor and the rear caliper will only work with a 160mm disc rotor, no adaptors are needed nor are any available.

Re: XTR m965 brakes & Pauls Thumbies You would need to get a 180mm disc rotor, put it on the front wheel and the swap the 160mm disc onto the rear wheel.

Re: XTR m965 brakes & Pauls Thumbies Thumbies now sold