Search results

Hi, Thanks for the above. Did your research with Dan progress any further resulting in technical drawings? Cheers, Alex

I am researching the feasibility of reproducing some forks, starting with uniklein on the basis that I have a pair to work off as a reference point. Does anyone have any drawings they are able to share? There are some basic sketches of a box fork in the 1991 brochure, ideally after similar with...

As above, I'm after a 32H Ringle hub in polished silver to take 8 speed cassette. Have a NOS front and looking to build a matching rear. Any help greatly appreciated. Thanks, Alex

Having given up on trying to source a set of uniklein or strata forks it's time to sell MC2 bars (uncut zero rise) and 2x spacers, anti chain suck device, cable guide and replacement cap (still in wrapping). Forks I believe are Manitou Mars Elite and are a good colour match. Paint condition...

Hi, Finally completing a klein build, looking for a pair of rims as above. If wheelsets made up would also consider depending on hubs. Many thanks, Alex

Final stages of completing a Kona Explosif rebuild and found the headset was beyond repair. The result is a new headset but the steerer is about 15mm too shy, hence I need to weld a section on for the locking nut to reach. Does anyone have any off-cuts or completely knackered project 2s who is...

Hi, I'd be keen on the onza grips if still available. Many thanks, Alex

Hi, Thank you for the offer. Someone has contacted me with some in really good condition so going to go for those. All the best, Alex

Hi, Finishing a rebuild of a 94 Kona Explosif and after some period pedals. Ideally as above. Bike is largely NOS so condition must be good. Many Thanks, Alex

Yes, apologies. The bike has been stored at the back of a shed for a very long time (blame children) and I was mistaken on frame size As per serial number and having remeassured it is 18 from centre of BB to top of seat tube

photos of 18inch frame to swap

Hi, I have an imacualte Kona Hei Hei 18 frame, no dents or scratches. Believe it is from1996. Looking to swap for an 19 inch frame. Located South Coast near Worthing and also SW London Cheers Alex

As above, almost finished a restoration of a 1994 Explosif and looking for the last few missing parts Many thanks Alex

Sounds good, please message me details re paypal Ta

If you'd let me know a price for a set that would be great Cheers Alex

Long shot but if you still have a set left let me know Thanks

Hi, I'm looking for either a 230sbp 36 hole and/or a 230tib 32 hole rim or wheels In a perfect world with light wear/nos One listed on gumtree in sheffield sadly wont post Many thanks, Alex

Hi, Interested in STI, brakes and rear mech please Would you message details direct Cheers Alex

Hi Biff, Obviously its an old post but I'm chasing all possible leads and/or seeking advice. I'm trying to source a pair of Strata B/B forks What size is the ones in the photo and would you consider selling them?....Probably not is my guess Thanks

Based on the decals they are triple butted but I think the condition isn't quite what I'm after. Sure they could be fine but it's hard to tell the extent of rust from photos Thanks all the same though