Search results

Hi Johnny, Thank you for responding, however 350 mm would probably be too narrow. And the stem would not fit my own handlebar.

Hi Guys, I am looking for a quill stem, 80 mm long. I have the handlebars (26.2 mm), but I understand there are various diametres out there, so if the stem comes with bars, I will consider them, but I would need a shallow and rather narrow handlebars - 380 mm preferably. Thank you.

Thank you, but a 40cm max bars would be preferable. I should have stated that the crankset is the key item actually and without one I can't go any further (I have the bars and stem, just not the size I would like). Thanks anyway.

Thanks, I wanted to try out a 167.5mm, however would you mind to send me some photos of the crankset please?

Thanks. I tried to source a 111mm bottom bracket, but can't find it for sale for a reasonable price. If you know were to get it, I will appreciate.

Hi Guys, Can you please advise if this crankset (see photo below) will work with Shimano 600 8-speed system that is on an Italian steel frame bike with Italian type BB. All drivetrain including the front mech is Shimano 600 tricolour, double. And importantly, what type, size and axle length...

Hi Guys, I am looking for Shimano 600 167.5mm crankset or something very same to finish a project. Also, need a 90mm quill stem preferably with shallow handlebars 38 to 40cm width. Thanks.

Thanks Guys for your help. We decided to bring the wheels to a bike shop for a service. We found out that the old tyres most likely weren't glued in, but just the rubber bonded itself into the rim, as it was never off for the last 25 years :). The old tyres are not tubular, so I believe a new...

Thanks for your response Excel. I have a photo of the rim with the old tyre on it. Would you know which rim type this is by looking at the picture?

Hi Guys, My friend just bought a nice steel frame bike equipped with Wolber GTX2 rims and there are tubular glued in tyres that are worn out (may be original from new) and need to be replaced. Do you know if you can fit clincher tyres with standard tubes on these rims? Cheers

Re: What is left? Hi, Can you please confirm what is left, is the saddle still there? Cheers.

Re: Re: Thanks Malc. Would you have a link to a picture of the exact shifters or have a photo of your own?

That is helpful info, thanks Ian.

Re: Re: Hi Malc, Preferably this colour to match: Silver / chrome would be second option. Are they 8-speed and compatible with my derailleur?

Thank you. I will let you know shortly ;).

Hi Latman, Thank you for the info. No, I wasn't aware of this. Below I attach a photo of my rear derailleur and I will appreciate your comments. It is the previus generation 105. Which shifters are compatible with it for an 8-speed Shimano cassette?

Thank you. Depends on the colour I may be interested, but I would appreciate some pictures, if possible.

Hi, I am looking for a set of 8-speed downtube shifters. Must be Shimano, preferably 7402 or 600-series. Thank you.

I am looking for a 165mm 8-speed Shimano crankset for an Italian BB, 70mm. Thank you.

Thanks. Just by the way, are these 7-speed chainrings (if I keep them) going to work with 8 or 9-speed chain?