Re:
yes it's Shimano 600 here are some pics with the shaft turned .short end on crank and front derailleur installed. it wasn't possible to setup the derailleur the other way.... Scott
Re: Claud Butler rebuild
thanks for the information Peachy! .the reason I was asking is that the axle with the long side on the crank side didn't lineup for the front derailleur.I flipped it around and it was fine.I could setup the derailleur and it worked fine. I thought that was a little...
Re:
Peachy! I have been told that my spindle and crank are not correct for my bike. they are the same units that have been used for 50 years .you are the person with the answers on Claud Butlers and I would like your opinion as you have the answer. Thank you for the help ...Scott
Re:
yes I matched the paint and decals.I think it's a Tipo Strada.The bicycle was stripped and trashed when I bought it.All the campo was gone.Here is the original picture before rebuild.The white was yellowed and there was a lot of rust,too much to just touch up the paint
I have just about finished my 1970 Claud Butler rebuild thought I would share some pictures, I would like to thank Steve at H Lloyd Cycles for all his help,very nice quality decals....Scott
Re: Claud Butler rebuild
Peachy! I thought you might like to see the paint and decals for the Claud Butler rebuild. Don't look too closely .It's not perfect....Scott
Re:
Hi Peachy! I believe it's a Tipo Strada from 1970.I bought it in very rough condition in 1970 from a rich kid it was in such bad shape I had to walk it home.I sold my Torpado for a profit and bought the parts I needed from Peel cycle in Montreal to get her going. I have never been able to...
hi I'm looking for a Regina G.S. Corse Merate 5 Speed Freewheel 14, 16, 18, 20, 22T Screw On
for the Claud Butler i'm rebuilding. my old one is in rough shape .looks like I wore it out.