Search results

The Goldtec brand was taken over by BETD and is still operating today, under the BETD brand

Sorry, I have placed this thread into the wrong section. Perhaps Mods can move it for me to the chat section? Thanks

I bought this frame a few years ago at the CRC clearance auction when they joined Wiggle. It was branded as a COVE, which is why i bought it. When i went to pick it up I realised it wasnt a COVE but just had COVE decals on. Can anyone help me identify what it might be? There are a few...

Re: Loving this build. A real retro vibe with the anodised colourings. I remember Titus frames from way back when and thought they were great. At £150 you got yourself a steal. You going to continue the multi coloured theme and get some Hope brakes? Looking foward to future updates

Excellent! Its a labour of love which will no doubt take months to complete. I would love an ATX 1 as it was the bike of dreams back in 1998! I will upload pics of the CNC process when im making the disc mount and the new linkage plates- hopefully in the next week

Re: I explained this in one of my previous posts- it was very difficult to manufacture with the machine i have. This new design is very straight forward by comparison. It also allows me to change the size of disc i use, further down the line if i wish. The image i uploaded of the carbon...

I picked up a new Fox shock to replace the knackered RST coil shock that has been on the bike since 1997. The original shock measures 180 i2i and the new one measures 184 i2i. This means that my new plates don’t fit- so i will have to remake them with a few alterations to allow for the...

Re: I have started a thread on my build. Doing my best to inspire! Lets see how you are getting on. I enjoy seeing others ideas on this frame

Thanks for the feedback so far guys. I have updated the previous posts with points i missed. This is an ongoing project and no doubt i will be adding and changing bits and pieces as time goes on! Below is a picture of the XT levers, Thompson bars and Ritchey WCS grips.

The groupset i had on the bike was a mish mash of various components I had in the garage which were replaced most weekends when I was racing. I had an Ultegra rear derailleur (short cage), AC DH cranks, XT Shifters and XT V Brakes. I decided all this had to be replaced - which led me to my...

As well as manufacturing these linkage plates, I replaced the stem, handlebars, seat post and seat collar with Thompson components. I have used these parts on builds I have done in the past and I am a fan. Another thing i wanted to alter on this build was the forks. I had an old set of...

I raced this bike back in 1997 when I was a teenager and have used it very little since then. I decided last year to use it as a pass time build and it has snowballed into a bigger project than I had intended. Before I started I had thought about restoring it as it was back in 97 but after a...

Re: Need an update here. Im doing a similar project with my ATX and i could do with some inspiration!

Re: Another update on this project. I have waited long enough to try and source an alternative rear end so rather than wait any longer i decided to design a bracket that would hold the rear disc caliper. So far i just have it 3D printed and hope to get it CNC’d in the next couple of weeks.

Im hoping to convert my old Giant ATX to 1x10 set up but what i dont understand is the measurements that are quoted when doing this. I read somewhere that the alignment might be an issue and the measurements are a guide to how this can be fixed/ corrected. First time doing this so I dont...

I have made some progress on this project but not as much as I would have liked. Life sometimes gets in the way of these things! So far I have upgraded the forks to RockShox Revelations, added a Cane Creek Headset and put on a set of Crank Bros wheels. I have added componentry from Thomson –...

I bought these brakes back in 1998 and used them for a week in France. They have been in storage ever since and i have recently removed them from my bike along with much of the other components. I hope i have given them the correct model name as it has been 21 years and my memory isnt the best...

Re: Same design with infill for added reinforcement

Re: I made the new linkage plates today. These are the first version. I have 2 more variations to try. Still on the hunt for an ATX 970 from '98 or ATX 950 if there's any out there. Project so far -

Re: That looks great! If you ever want to sell the frame, let me know. Id be glad to give you £ for it.