Search results

Forgot to mention I also cut off the eyelet for the rack mount.

I had a similar problem with the A2Z adaptor on my cindercone. Not sure whether it is clear from the picture but I cut away some of the silver outer plate so that it cleared the chain stays. works a treat now.

What?.........you mean get it dirty? I can't do that!!! :D I will have a play around with the ratios and think about it. I can get a 32t chain ring from BETD. only if you do it on a unicycle.

No not quite the magic gear Chain tensioner is a DMR Chain reactor. It works well

Thanks for the positive comments folks This site and forum gave me some inspiration and help so cheers folks The respray was in fact courtesy of Halfords. I nitromorsed the frame and used some etch primer followed by primer and a number of top coats with a rub down using 600, 800 and 1200...

Any suggestions? They are on Flikr

Sorry folks got there in the end.

hi Folks I just thought that I would share with you the fate of Poor Kona the 1993 Cinder Cone that some of you noticed on Ebay about a month ago. Well I purchased it as a project bike to tidy up and use as a commuter. It certainly was a project, the seat post had broken off inside...

i have not built the hub up yet however I have fitted it to a pair of Pikes that the hub will be used on. It fitted the forks with no probs. The hub flanges are wider than normal however the rotor mountings are such that the rotor is in the same position as a standard hub. I took a few...

HI I got a 203mm 3 bolt rotor from Hope in the end It took them about 3 weeks to reply to my request. They made up a rotor for around £27. This was a bargain compared to the £90 quote I had from a laser cutting company £50 CAD drawing and £40 minimum charge. You have to order it...

That's the widget Harry how much are you selling your spare one for? Cheers folks for the info. I will post some picks and details of the finished article once I have built it up. The frame is a 1993 Cindercone which I am in the process of painting. The original paint was shot and the...

Chain reaction do this http://www.chainreactioncycles.com/Mode ... elID=23466 But the clamp size is too large Cheers for the responses I will try it with out or improvise something.

HI Folks I have recently purchased a Kona Cinder Cone frame that does not have the cable guide clamp on the seat tube. Do I need this to run V brakes If so where can I get one?? Cheers Matt

Thanks for the response folks I have emailed Hope and had no response I have also emailed the importers and White Ind to no avail Looks like I will have to have one madeI have had some quotes from laser cutting firms Rotor price is reasonable however cost of creating a drawing is high.

Thanks for that. I quickly checked whether a 6 bolt rotor when I got the hub but the holes didn't seam to line up. Will check again tonight Forgot mentioned it is a 20mm hub that they built for the Rockshox boxxer fork. It will fit my 20mm Marzzochis but I am stuck for a disc. I think...

Hi Folks I have purchased a lovely White Industries front hub which has a 3 bolt disc rotor attachment. Does anyone have a a rotor that they want to part with that will fit my hub. Preferably 203mm Cheers Matt

I am fairly certain that they are 1"1/8

For sale is a set of Girvin Pro Forks Not to be confused with the linkage Girvin Cross links or Noleens These are the long travel versions with about 2.5 - 3" circa early 1990s These were the first down hill forks as used by folks who did the Kamikaze downhill runs back in the day...

Quasar Forks Hi I have just purchased some Quasar forks Did you have any luck finding out some info on the forks and finding a replacement shock??? Cheers

I am selling an 18 inch Saracen Traverse Hydrotec elevated chain stay frame circa early 1990s 1992 to be precise Tange triple butted steel tubing ovalised at the BB etc Ridged forks included in original burnt orange colour plus an STX headset which is a bit notchy The frame is designed for...