Search results

£130, offers?

£120?

Mechs- MT62, decent cosmetics, front in perfect woking order, rear has very slight play on the pins, jockeys perfect, even have bearing seals intact. Tyres- Only has 1 usable tyre, a CST manufactured Marin Rockstar 26x2.0 on the front, which I assume was OE spec. The sidewall is a bit dry and...

bb is original MT60, in usable condition. Spindle bearing surfaces and one cone are very slightly pitted but its still nice and smooth when fitted. Seals are both present and intact, needs new balls. Pedals- Mt60, Alloy body, steel cage. Cages need painted, one spindle has a bit of play. tried...

Shifters- Shimano Deore11 MT62 thumbies. Friction only left, friction/SIS right, 7 speed (7plus 1 clicks). left lever in very good cosmetic condition, top cover on right a bit faded and bashed. All clamps adjusters and mechanism perfect. Brake Levers- Shimano deore11 MT63, 2 finger version. VGC...

Frame- 19" ctc welded, from Tange MTB double butted CR-MO tubeset. No dents, seatpost was stuck and had been attacked with a hammer and screwdriver. I've removed it and tidied up the damage to the seatpost with a file. No structural rust at all but a bit scruffy, could do with new paint and...

As title, project bike in generally good condition but needing a few wee bits and pieces. This is the 600 model, bonded Reynolds 2060 tubeset (alloy lugs, 531 main tubes and 501 stays/forks), with full 105 groupset. To make a runner it needs inner cables, a chain, headset crown race (cracked)...

I'll get some up when the camera arrives home this evening!

As title, can't find a copy of the '89 Marin catalogue to check specs but it seems to be almost entirely complete and original. To make a "runner" needs cables, new bearings throughout, a chain and 1 tyre. I've got as far as stripping to clean/ assess the components but I now need to sell...

bikes worth canti brakes with straddle wires, sleeves and pads with loads of life left. £10 posted.

Bought a set of broken forks from Mike for spares. Exactly as described and posted very quickly. Rather than just throwing these away,he went to the trouble of advertising, packaging and posting them in case they were of any use to someone else, all for a fiver! Many thanks Mike.

Re: Wizard's wonderfull wold of non-wetro sell off! I'd like the brakes please.

I'll have these please!

If the cassette is still available and I've counted correctly (34 teeth!) then I'll take it please, pm sent to that effect.

how much to post the lx chainset (to UK)?

looking for one of these to try to remove the spider for a "project" so must be cheap, condition of arm unimportant but chainring holes and threads must be undamaged. Also need a 32 tooth alloy ring and 8 bolts.

I've had sora and the older 105 shifters apart and put back together again! very fiddly but can be done. Have a google, a few folk have put up photos of the steps involved, good luck!

Looking for a pair of 36 hole hubs to take a 9 speed cassette. Have a pair of 32 hole lx 563/5 in nice condition to swap if that's of any interest to anyone.

8) cracking find, still haven't done anything to mine :oops:

Looks very nice and all original bar the saddle http://www.gumtree.com/p/for-sale/diamo ... 1015687060