For Sale Garage Clearance cheap and free now reduced

[creamedhoney]

Sr apex chain set 170mm cranks 52/42 £12 posted
2 x sr stems 100mm reach £7 posted each
ITM short reach 50mm high rise stem £7 posted
ITM stem 100mm reach £7 posted
Shimano 105? Pedals (PD 6401) paint flaking bearings 1x good, 1 x ‘ok’ £8 posted
Unknown pedals bearings ok £6 posted
105 front mech braze on , never used but chain guide condition not perfect from sitting in the garage £8 posted
Sachs Huret band on front mech - free - £3 posted
Sachs Huret rear mech free - £3 posted
GB brakeset 2 x callipers ( 1 x courier 1 x courier plus) & levers £6 posted
Happy to combine postage as required or feel free to make offer for number of bits etc
All can be collected from Porthtowan in Cornwall if preferred. Thanks for looking

 

[creamedhoney]

Also sr silstar chainset 165mm cranks 50/36 - will polish up ok. Teeth seem ok tapers and threads all good
£12 posted

 

[creamedhoney]

Hi Henry st Claire - did you want those pedals?

 

[creamedhoney]

Prices now minus £2 per item (subject to £3 min which will cover postage)

 

[CC Rider]

Please could you tell me the clamp diameter of the 50mm short reach stem.
Thanks

 

[creamedhoney]

Hi yes will do tomorrow- sorry haven’t look at this for a few days

 

[Henrystclair]

Hi Henry st Claire - did you want those pedals?

Sorry - missed that! Now have pedals thanks...

 

[Maxcumus]

Hey are the SR Silstar crankset still available? Do you know what the BCD is please?

 

[creamedhoney]

Hi yes silstar crankset still available bcd = approx 120mm - bit difficult to measure as bolt hole not diametrically opposite one another - not sure if 120 is a ‘standard’

 

[creamedhoney]

Itm quill stem clamp dia measures at 26mm with an old tape measure in unbolted mode. Sorry for delay @ ccrider