XTR M952 Chainset, Hope C2 Brakes F&R, Hope XC Wheel + .

[RobSpragg]

Hi All,

Having a bit of a clearout, not too sure on prices so I'll take a guess and see how we get on...

1) Shimano XTR M952 Chainset (24,34,46) - £40 + postage
Cosmetically quite worn on the crank arms, chainrings have had some use and have a little wear, but have a fair bit of life left yet I would say. I also have a the M952 bottom bracket that I will include FOC, it is basically worn out but will still hold the cranks on if you can put up with a little play and slightly rough bearings. Gallery here: http://www.robspagg.plus.com/retrobike/M952/index.html
SOLD

2) Hope C2 Front disc brake
Complete with 160mm rotor, mounting hardware + pads with plenty of life left. Cosmetically some scuffs and the seal/boot that covers the master cylinder push rod has torn. In full working order although a bleed may be required to return them to their full former glory.
http://www.robspagg.plus.com/retrobike/C2_Front/index.html
3) Hope C2 Rear disc brake
As above but with only 5 rotor bolts (one is lost somewhere on the garage floor)http://www.robspagg.plus.com/retrobike/C2_Rear/index.html
Sold F + R without rotors £60 posted.
Rotors SOLD £10 pair delivered

4) Hope XC Front Wheel - £30 + postage
Hope XC Front disc hub built on Mavic x223 rim with DT swiss spokes (can't remember which). Nothing wrong with this wheel other than it doesn't support 15QR and all MTB's in the household now roll on these. Few scuffs from general use over the years.
http://www.robspagg.plus.com/retrobike/Hope_XC_Wheel/index.html

5) Shimano Deore XT M739 Front Mech - £15 + postage
Bottom swing, top pull, 34.9mm + I have shims from new style mechs that seem to fit. Some scuffs to the cage and a little on the mounting band, but there is no play in the mech itself and is in perfect working order. http://www.robspagg.plus.com/retrobike/XT_Front/index.html

Have some other stuff as well but no photos yet and probably not of retro interest:
6) Bontager 120mm 7 deg rise stem matt silver - £8 + postage
7) Easton EA50 low riser bars matt silver - £10 + postage
Cut down to XC width (can measure on request). Both standard bar dia.
8 ) 2006 Giant XTC aluminium frame (medium) - £80 + postage
including seatpost and QR clamp. In good condition. SOLD

 

[tinker]

Shimano XTR M952 Chainset

Hi is ther any chance of some pics of Shimano XTR M952 Chainset, please

im sorry i never seen the link till after i sent post..
Tinker

 

[Enid_Puceflange]

I think big.eck is looking for XTR cranks

Gc

 

[paininthe]

first for f & r hope disc brakes please

 

[RobSpragg]

PM's to all those who enquired - Thanks for the interest.

Sales Pending on C2 Brakes, XTR Chainset and Frame - everything else still availible.

Also just dug out a pair of folding Continetal Cross Country 1.5" tyres I'll add to the list:

One has been used but still looks new (sharp edges on all tread blocks and the molding risers still in tact) - £12 + postage

Other has had some more use (tread block edges have become chamfered but not worn down) - £9 + postage

Can include photos tonight if there is interest.

 

[RobSpragg]

Updated sold items.

Anyone for the C2 160mm rotors? (pics as above) £10 for the pair posted in UK or offers.

 

[ben123]

PM'd about c2 rotors bump

 

[RobSpragg]

List updated.

Any more offers before the rest goes on ebay?

 

[DM]

Bugger - I could have done with the brakes and rotors...