Raleigh Dynatech 2060 Frame and Forks. 16", IIRC Reynolds 531 tubes throughout. Needs a re-spray and small amount of crimping around front mech area where previous owner was a monkey. Great singlespeed/winter hack or commuter as its got eyelets for rack/guards etc£40 posted
Deore XT M738 STI units. I have never used these so cannot make a statement about their operation. Bottom cover is missing from the right hand lever, but other than that, they seem OK. £15 posted
Ritchey seatpost. 27.0mm dia, uncut. Good condition where it counts, bit rough below the insertion mark though £10 posted
300LX groupset, taken from a 1990? Kona Firemoutain. U-brake for the rear. Shifters and levers are included but they are currently still attached to the bars. £40 posted or nearest offer
Rockring, Profile stem 1-1/8" 130x0, Marin Lite stem 1-1/8" roller for brake cable 135x5, WTB greaseguard hub 32h. £7.50 posted each
Dia Compe PC8 levers, godd condition but a little decal peel on one lever £7.50 posted
Chainrings, 110BCD,28/38/48, made by SR. Used £10 posted
Kona Velocity 1-1/8" all decals present, not in bad condition after a clean up 130mm £10 posted. Random 135mm aheadstem 10deg rise £6 posted
OEM levers from a Cannondale, for cantis. £5 posted
Deore XT M738 STI units. I have never used these so cannot make a statement about their operation. Bottom cover is missing from the right hand lever, but other than that, they seem OK. £15 posted
Ritchey seatpost. 27.0mm dia, uncut. Good condition where it counts, bit rough below the insertion mark though £10 posted
300LX groupset, taken from a 1990? Kona Firemoutain. U-brake for the rear. Shifters and levers are included but they are currently still attached to the bars. £40 posted or nearest offer
Rockring, Profile stem 1-1/8" 130x0, Marin Lite stem 1-1/8" roller for brake cable 135x5, WTB greaseguard hub 32h. £7.50 posted each
Dia Compe PC8 levers, godd condition but a little decal peel on one lever £7.50 posted
Chainrings, 110BCD,28/38/48, made by SR. Used £10 posted
Kona Velocity 1-1/8" all decals present, not in bad condition after a clean up 130mm £10 posted. Random 135mm aheadstem 10deg rise £6 posted
OEM levers from a Cannondale, for cantis. £5 posted