bedraggled
Senior Retro Guru
I had to buy a full bike for the frameset so I'm now looking to sell all the other components (plus a few other bits I have left over).
Gave the bike a test ride for a couple of miles and everything worked fine.
All prices assume collection from Reddish, Stockport (or Hollinwood, Oldham).
Can post most items at additional cost (2nd class signed for, probably £3.90) not posting tyres/mudguards (too big for Royal Mail).
Will take extra pictures if required.
First to pay/turn up gets preference
1. Withdrawn.
2. Withdrawn.
3. Withdrawn.
4. Withdrawn.
5. Withdrawn.
SOLD. Cinelli 64-42 Giro d'Italia handlebars and 90mm 1A stem, drilled no grooves, end of the stem bolt has been flattened to prevent the wedge coming off (not sure why :facepalm: ), stem has a number of scratches, £20 pair.
6. Withdrawn.
7. Withdrawn.
8. Withdrawn.
9. Withdrawn.
10. Withdrawn.
SOLD. Simplex shifters, gear cable end is stuck in left shifter and will require drilling out, £15.
12. New pair Continental Top Contact 700 x 32mm tyres £45 pair, brand new, but a bit dusty (RRP is £50 each), for pic see link.
SOLD. Shimano FC-1050 crankset, 52/42 170mm, £15.
SOLD. Early Dura Ace (1970's) square taper bottom bracket 68-112, one side of axle has some brinelling £15.
SOLD. Shimano FC-6206 170mm square taper, non drive side only crank arm, £5, taper and thread fine but lots of scratches.
16. Truvativ Elita 175mm drive side only triple crank arm £5, comes with non drive arm but non drive pedal thread is ruined (only about a third of the thread is left), plus well used GXP bottom bracket.
SOLD. Short reach stem, length 160mm reach 40mm £5, not sure of clamp size, presume 25.4.
18. Withdrawn.
BINNED. Shimano FC-MT60 175mm square taper, drive side only, triple crank arm £1, very tatty but tapers look fine.
I'm after either Bontrager VR-C 26.0 or Soma Highway One 26.0 bars or any other compact bars with 26mm clamp (are there any?), preferably silver, could swap/buy.
SOLD I also have for sale a Rixon frameset (frame, forks, headset, seatpost) made from Reynolds 531 Competition tubing (for pic see link).
The frame is in excellent condition with no dents or damage.
Measurements are: Seat tube c-c = 57cm, Top tube c-c = 56cm, Head tube = 16cm Rear spacing is 130mm, seatpost is 27.2mm and the headset is 1".
https://www.flickr.com/photos/39177596@N07/
Gave the bike a test ride for a couple of miles and everything worked fine.
All prices assume collection from Reddish, Stockport (or Hollinwood, Oldham).
Can post most items at additional cost (2nd class signed for, probably £3.90) not posting tyres/mudguards (too big for Royal Mail).
Will take extra pictures if required.
First to pay/turn up gets preference
1. Withdrawn.
2. Withdrawn.
3. Withdrawn.
4. Withdrawn.
5. Withdrawn.
SOLD. Cinelli 64-42 Giro d'Italia handlebars and 90mm 1A stem, drilled no grooves, end of the stem bolt has been flattened to prevent the wedge coming off (not sure why :facepalm: ), stem has a number of scratches, £20 pair.
6. Withdrawn.
7. Withdrawn.
8. Withdrawn.
9. Withdrawn.
10. Withdrawn.
SOLD. Simplex shifters, gear cable end is stuck in left shifter and will require drilling out, £15.
12. New pair Continental Top Contact 700 x 32mm tyres £45 pair, brand new, but a bit dusty (RRP is £50 each), for pic see link.
SOLD. Shimano FC-1050 crankset, 52/42 170mm, £15.
SOLD. Early Dura Ace (1970's) square taper bottom bracket 68-112, one side of axle has some brinelling £15.
SOLD. Shimano FC-6206 170mm square taper, non drive side only crank arm, £5, taper and thread fine but lots of scratches.
16. Truvativ Elita 175mm drive side only triple crank arm £5, comes with non drive arm but non drive pedal thread is ruined (only about a third of the thread is left), plus well used GXP bottom bracket.
SOLD. Short reach stem, length 160mm reach 40mm £5, not sure of clamp size, presume 25.4.
18. Withdrawn.
BINNED. Shimano FC-MT60 175mm square taper, drive side only, triple crank arm £1, very tatty but tapers look fine.
I'm after either Bontrager VR-C 26.0 or Soma Highway One 26.0 bars or any other compact bars with 26mm clamp (are there any?), preferably silver, could swap/buy.
SOLD I also have for sale a Rixon frameset (frame, forks, headset, seatpost) made from Reynolds 531 Competition tubing (for pic see link).
The frame is in excellent condition with no dents or damage.
Measurements are: Seat tube c-c = 57cm, Top tube c-c = 56cm, Head tube = 16cm Rear spacing is 130mm, seatpost is 27.2mm and the headset is 1".
https://www.flickr.com/photos/39177596@N07/