Suntour XC Pro, Syncros, Magura, Cannondale SE 1000

chicken

Retro Guru
Feedback
View
Having a complete clear out of an unfinished project, as I’ve sat on this for two years and just don’t have the time to complete.

There’s more to come and the XC Pro is a full group set minus pedals and headset, just ran out of daylight so will snap more pictures next weekend.

6B569A94-A075-4432-8065-C0B9EAE08347.jpeg


Complete set of Suntour XC Pro gold finish brakes inc Koolstop pads allround. Never mounted so almost NOS condition £30 inc postage. Can probably find matching straddles and hangers. SOLD

6382D95B-C856-4265-8CEE-CE117C587BD9.jpeg


XC Pro gold finish brake levers, almost NOS condition, £25 inc postage SOLD

0E0EF076-8661-4178-877B-7CA6B36197BF.jpeg


XC Pro MD Greaseguard crankset 175mm 20/32/42 rings with all important greaseguard caps and crank bolts. Rings hardly used £45 inc postage SOLD

edited-image.png


XC Pro MD power ring 44T gold finish, new and never used £15 inc postage

E255CF35-0403-4C72-A7D8-3D608BAEAC8B.jpeg


XC Pro MD rear mech (I have the lower jockey cage sticker for this squirrelled away so that will come with too). Good condition £25 inc postage SOLD

E716258C-2D0D-42A5-88D9-0B4CB4240F2E.jpeg


Suntour XC Pro MD front mech 31.8mm band £20 SOLD

D9AF16BB-60BF-45BC-895C-0A8763CA8F6C.jpeg


‘Classic’ XC Pro brakelever with correct thicker ferrules now £12 inc postage

AABE5207-8031-4921-A55F-7CD8F48A7551.jpeg


Suntour XC Pro 8speed Thumbshifters. Nick to left hand thumb shifter but function perfectly £12 inc postage Sold

B70EC0E9-EA8D-4F90-9342-8710C93D7B74.jpeg
edited-image_1.png


Suntour XC Pro Greaseguard hubs on Campagnolo Stheno 32 hole with XC Pro MD 8speed cassette. I’ve had to rig some spacers in the rear axle, so it needs some minor attention. With Ritchey Megabite Z Max. Straight and true £70 (working out postage or collection) SOLD

FAEE933A-03A7-44A4-9AFF-90614269E0E0.jpeg


Syncros 29.4 x 330mm. Needs a set of decals (worst side shown - other is good) £25 inc postage SOLD

A4CEC981-9761-4EE7-A0F8-06CC222AF464.jpeg

38DB0BC5-8652-4BE3-A854-2759F7C19BEA.jpeg


Selle Italia Turbo Lite '94 date stamp. Small tear to rear corner and cover lifting at rear, graphics are good so could be stuck back down. £10 inc postage


9777131C-DA80-4A76-BDD1-B03158A74837.jpeg

2D2C6F5D-48FF-4C58-852D-FD1CBAC68509.jpeg


Syncros Handlebars, to the best of my knowledge, though they could be something else as there's no markings. Cut to 535mm. £10 + postage

A35BE74C-0B9A-4E15-BD84-01425353F9A4.jpeg


Complete set of Magura Racelines with green 'trials' pads. Full working order and I have fixings somewhere, so these will be supplied too. In pretty good condition all things considered without too much fading on the yellow. I've squeezed the levers and all pads move smoothly, but I've never mounted them. £35 inc postage SOLD

6C6F7CED-6249-48CF-AD53-E837BF887B4D.jpeg


X-lite Stubby Ski bar ends quite heavily scuffed, so £5 plus post seems fair SOLD

0A8F1B74-A33E-4590-B656-E832C550CE6C.jpeg

IMG_1690.jpg
SOLD

Cannondale Competition Taperlites in silver, scratches but look good when mounted, uncut with endplugs, £10 plus postage SOLD



Cannondale SE 1000 frame kit. Stripped down and ready for new paint or reassembly and ride if you like 'patina'. Comes with flexstem, rear shock, original force 40, new pivot bolts, pivot bearing (effectively a BB - new bearings required), 1" pepperoni and original manual. This is probably not worth what I wish it were as it's a seminal bike in my opinion, so I'll start off at £70 though appreciate the value is only what someone wants to pay, so will accept reasonable offers. collected or plus post and packing.
 
Re:

They are some very reasonable prices!

A few bits I fancy, but I'll check again in the morning and see what scraps are left!
 
Re: Re:

BoyBurning":gw54ugtx said:
They are some very reasonable prices!

A few bits I fancy, but I'll check again in the morning and see what scraps are left!

Thank you. Along with time, the reason I've never finished the project is the prices for certain parts has kind of killed the magic for me. You pay almost as much as when parts where brand new 20 years ago and this isn't what I want to be involved in, I just can't justify the expense. Figured I should stand by my word and charge prices that were a fair reflection of age and condition.
 
Re: Re:

thosewerethedays":za3mjzjd said:
Evening,

Please can I tak the wheelset if still available and seconds on xc pro bits if mojo passes

Regards

If it all falls through you are in the queue
 
Back
Top