Lo-pro pursuiting/TT bike built by Geoff Beech in Goole and badged as 'Wyld'. The frame is built with columbus tubing and has a curved top-tube. Seat tube measures 59cm c-t, top tube 59cm c-c (as the crow flies), wheel base 99 cm axle-axle
Parts include: Vetta SL saddle; 27.2 mm seatpost; Mavic brake callipers; Mavic front and rear gear mechs; Mavic 170mm cranks with 53 & 42 rings; Shimano PD-6402 (look delta type) pedals; ITM 115 mm stem, 44 cm c-c bars with tri-bars; Mavic brake levers; Campag type bar end gear changers in the tri-bars; Mavic GL330 28 hole sprint rims on Campag Record large flange hubs with Continental Giro tubs and an 8-speed Maillard block.
This bike was originally built for pursuiting on the track so has horizontal rear-facing dropouts. When curved tubes were outlawed by the UCI, the frame had a gear-hanger brazed on and the bike was then used for Time Trialling.
Pictures here: http://www.flickr.com/photos/dkmikesbik ... 567347738/
Parts include: Vetta SL saddle; 27.2 mm seatpost; Mavic brake callipers; Mavic front and rear gear mechs; Mavic 170mm cranks with 53 & 42 rings; Shimano PD-6402 (look delta type) pedals; ITM 115 mm stem, 44 cm c-c bars with tri-bars; Mavic brake levers; Campag type bar end gear changers in the tri-bars; Mavic GL330 28 hole sprint rims on Campag Record large flange hubs with Continental Giro tubs and an 8-speed Maillard block.
This bike was originally built for pursuiting on the track so has horizontal rear-facing dropouts. When curved tubes were outlawed by the UCI, the frame had a gear-hanger brazed on and the bike was then used for Time Trialling.
Pictures here: http://www.flickr.com/photos/dkmikesbik ... 567347738/
